International Harvester D-324 vs International Harvester Farmall 140

11 material differences · fewer than 12

Tractor one

1956–1962

No measured PTO figure

Tractor two

1958–1979

No measured PTO figure

Which should you choose?

Read our verdict on the D-324 and the Farmall 140 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

International Harvester D-324 and International Harvester Farmall 140, field by field
Field	D-324	Farmall 140	Gap
Engine
Engine power, claimed claimed	23.7 hp	23.7 hp	—
Engine declared	INTERNATIONAL-HARVESTER DD-111	INTERNATIONAL HARVESTER C-123	differs
Displacement declared	1.83 L	2.01 L	+10% Farmall 140
Maximum torque declared	73 lb·ft · 99 N·m	106 lb·ft · 144 N·m	+45% Farmall 140
Transmission
Top speed declared	11.8 mph · 19 km/h	12.4 mph · 20 km/h	+5% Farmall 140
Clutch declared	Pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	—	4.6 gpm · 17.4 L/min	—
Three-point lift at ends declared	1,323 lb · 600 kg	—	—
Rear PTO speeds declared	540 rpm	541 rpm	differs
Weight & dimensions
Unladen weight declared	3,386 lb · 1,536 kg	3,000 lb · 1,361 kg	+13% D-324
Wheelbase declared	70.0 in · 1,779 mm	71.0 in · 1,803 mm	—
Length declared	108.3 in · 2,750 mm	107.0 in · 2,718 mm	—
Width declared	64.6 in · 1,640 mm	56.0 in · 1,422 mm	+15% D-324
Height declared	61.0 in · 1,550 mm	65.5 in · 1,664 mm	+7% Farmall 140
Ground clearance declared	15.1 in · 383 mm	22.3 in · 566 mm	+48% Farmall 140
Turning radius, braked declared	9.2 ft · 2.80 m	8.4 ft · 2.55 m	+10% D-324
Fuel tank declared	31.7 qt · 30.0 L	44.0 qt · 41.6 L	+39% Farmall 140

Source

Source