6 material differences · fewer than 12
Tractor oneInternational Harvester D-322 (MC Cormick-International)1962–1965No measured PTO figureTractor twoZETOR 20111963–1967No measured PTO figure
Which should you choose?
Read our verdict on the D-322 and the 2011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D-322 | 2011 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 21.7 hp | 21.7 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DD-99 | ZETOR Z-2001 | differs |
| Displacement declared | 1.63 L | 1.56 L | — |
| Maximum torque declared | 63 lb·ft · 86 N·m | 63 lb·ft · 85 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 13.7 mph · 22 km/h | +10% 2011 |
| Clutch declared | Pedal-operated dry Fichtel & Sachs single-plate clutch | Two-disc double dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.3 gpm · 20.0 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,364 lb · 1,526 kg | 2,866 lb · 1,300 kg | +17% D-322 |
| Wheelbase declared | 70.1 in · 1,780 mm | 68.7 in · 1,745 mm | — |
| Length declared | 108.3 in · 2,750 mm | 117.3 in · 2,980 mm | +8% 2011 |
| Width declared | 64.6 in · 1,640 mm | 63.8 in · 1,620 mm | — |
| Ground clearance declared | 15.1 in · 383 mm | 14.2 in · 360 mm | +6% D-322 |
| Turning radius, braked declared | 8.4 ft · 2.55 m | — | — |
| Fuel tank declared | 28.5 qt · 27.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester D-322 (MC Cormick-International) sources
Source
- Source: Traktorenlexikon, “McCormick D-322”
- Source: Traktorenlexikon, “McCormick DED 3”
ZETOR 2011 sources
Source
- Source: Traktorenlexikon, “Zetor 2011”
- Source: Traktorenlexikon, “Zetor 2511”