International Harvester D-322 (MC Cormick-International) vs SOMECA 215 (F)

11 material differences · fewer than 12

Tractor one

1962–1965

No measured PTO figure

Tractor two

1965–1968

No measured PTO figure

Which should you choose?

Read our verdict on the D-322 and the 215 (F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester D-322 (MC Cormick-International) and SOMECA 215 (F), field by field
Field	D-322	215 (F)	Gap
Engine
Engine power, claimed claimed	21.7 hp	21.7 hp	—
Engine declared	INTERNATIONAL-HARVESTER DD-99	FIAT 614.010	differs
Displacement declared	1.63 L	1.14 L	+44% D-322
Maximum torque declared	63 lb·ft · 86 N·m	46 lb·ft · 63 N·m	+37% D-322
Transmission
Top speed declared	12.4 mph · 20 km/h	14.3 mph · 23 km/h	+15% 215 (F)
Clutch declared	Pedal-operated dry Fichtel & Sachs single-plate clutch	Pedal operated dry Ferodo single plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	2.4 gpm · 9.0 L/min	—
Three-point lift at ends declared	3,307 lb · 1,500 kg	1,213 lb · 550 kg	+173% D-322
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,364 lb · 1,526 kg	2,183 lb · 990 kg	+54% D-322
Wheelbase declared	70.1 in · 1,780 mm	66.9 in · 1,700 mm	—
Length declared	108.3 in · 2,750 mm	112.6 in · 2,860 mm	—
Width declared	64.6 in · 1,640 mm	57.7 in · 1,465 mm	+12% D-322
Height declared	61.0 in · 1,550 mm	61.8 in · 1,570 mm	—
Ground clearance declared	15.1 in · 383 mm	19.1 in · 485 mm	+27% 215 (F)
Turning radius, braked declared	8.4 ft · 2.55 m	9.0 ft · 2.75 m	+8% 215 (F)
Fuel tank declared	28.5 qt · 27.0 L	25.4 qt · 24.0 L	+13% D-322

Source

Source