International Harvester D-320 Standard vs John Deere Modell-M

8 material differences · fewer than 12

Tractor one

1958–1962

No measured PTO figure

Tractor two

1947–1952

No measured PTO figure

Which should you choose?

Read our verdict on the D-320 Standard and the Modell-M → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 2 fields identical or within 5%, which is not counted as material

International Harvester D-320 Standard and John Deere Modell-M, field by field
Field	D-320 Standard	Modell-M	Gap
Engine
Engine power, claimed claimed	19.7 hp	20.4 hp	—
Engine declared	INTERNATIONAL-HARVESTER DD-99	—	—
Displacement declared	1.63 L	—	—
Maximum torque declared	63 lb·ft · 86 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	9.9 mph · 16 km/h	+25% D-320 Standard
Clutch declared	—	Pedal-operated dry Auburn single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	4.3 gpm · 16.1 L/min	—
Three-point lift at ends declared	1,323 lb · 600 kg	—	—
Rear PTO speeds declared	540 rpm	546 rpm	differs
Weight & dimensions
Unladen weight declared	2,884 lb · 1,308 kg	3,929–4,292 lb · 1,782–1,947 kg	differs
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	70.0 in · 1,779 mm	70.0 in · 1,778 mm	—
Length declared	108.3 in · 2,750 mm	102.0–125.2 in · 2,591–3,180 mm	differs
Width declared	64.6 in · 1,640 mm	50.8–89.4 in · 1,290–2,270 mm	differs
Height declared	61.0 in · 1,550 mm	50.5–58.7 in · 1,283–1,490 mm	differs
Ground clearance declared	15.1 in · 383 mm	21.0 in · 533 mm	+39% Modell-M
Turning radius, braked declared	8.4 ft · 2.55 m	—	—
Fuel tank declared	28.5 qt · 27.0 L	40.0 qt · 37.9 L	+40% Modell-M

Source

Source