International Harvester 453 or ZETOR 4712?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 453 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4712 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The International Harvester 453 suits loader and hydraulic implement work better on this data: 43% (8.7 L/min / 2.3 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for International Harvester 453 and ZETOR 4712, with the call on each
Question4534712Call
Which puts more power through the PTO shaft?33.1 kW (44.4 hp)Traktorenlexikon, “McCormick 453”33.1 kW (44.4 hp)Traktorenlexikon, “Zetor 4712”Not comparableNot comparable on power at the PTO shaft: the 453 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4712 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 453 and the 4712.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 453 and the 4712.
Which pumps more oil for implements?28.7 L/min (7.6 gpm)Traktorenlexikon, “McCormick 453”20.0 L/min (5.3 gpm)Traktorenlexikon, “Zetor 4712”AheadThe International Harvester 453 has 43% more hydraulic flow (8.7 L/min / 2.3 gpm) than the ZETOR 4712 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,410 kg (3,109 lb)Traktorenlexikon, “McCormick 453”—No figureNo call on three-point lift: no figure on record for the 4712.
Which is heavier, for traction?2,180 kg (4,806 lb)Traktorenlexikon, “McCormick 453”2,050 kg (4,519 lb)Traktorenlexikon, “Zetor 4712”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 453 and the 4712.
Which has the wider choice of gears?8 to 16Traktorenlexikon, “McCormick 453”10Traktorenlexikon, “Zetor 4712”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 453 and the 4712.
Which is faster on the road?20 km/h (12.4 mph) to 25 km/h (15.5 mph)Traktorenlexikon, “McCormick 453”25 km/h (15.5 mph)Traktorenlexikon, “Zetor 4712”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “McCormick 453”540 rpmTraktorenlexikon, “Zetor 4712”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “McCormick 453”independentTraktorenlexikon, “Zetor 4712”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “McCormick 453”2WDTraktorenlexikon, “Zetor 4712”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1971–19751972–1977EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 453 has 43% more hydraulic flow (8.7 L/min / 2.3 gpm) than the ZETOR 4712 (both pump flow, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 453 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4712 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources