IMT 569 De Luxe or Massey Ferguson MF 265?
Which should you choose?
The figures split: the Massey Ferguson 265 is ahead on hydraulic flow and PTO speeds; the IMT 569 De Luxe is ahead on three-point lift and top speed.
- The Massey Ferguson 265 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The IMT 569 De Luxe suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 569 De Luxe | MF 265 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 37.4 kW (50.1 hp)Traktorenlexikon, “IMT 569” | 38.5 kW (51.7 hp)Traktorenlexikon, “Massey Ferguson MF 265” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 569 De Luxe and the MF 265. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 569 De Luxe and the MF 265. |
| Which pumps more oil for implements? | 15.0 L/min (4.0 gpm)Traktorenlexikon, “IMT 569” | 26.5 L/min (7.0 gpm)Traktorenlexikon, “Massey Ferguson MF 265” | AheadThe Massey Ferguson 265 has 77% more hydraulic flow (11.5 L/min / 3.0 gpm) than the IMT 569 De Luxe (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,530 kg (5,578 lb)Traktorenlexikon, “IMT 569” | 1,800 kg (3,968 lb)Traktorenlexikon, “Massey Ferguson MF 265” | AheadThe IMT 569 De Luxe has 41% more lift (730 kg / 1,609 lb) than the Massey Ferguson 265 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,860 kg (6,305 lb)Traktorenlexikon, “IMT 569” | 2,630 kg (5,798 lb)Traktorenlexikon, “Massey Ferguson MF 265” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 569 De Luxe and the MF 265. |
| Which has the wider choice of gears? | 10Traktorenlexikon, “IMT 569” | 8 to 12Traktorenlexikon, “Massey Ferguson MF 265” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 569 De Luxe and the MF 265. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “IMT 569” | 25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 265” | AheadThe IMT 569 De Luxe has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson 265 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “IMT 569” | 540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 265” | AheadThe Massey Ferguson 265 offers 1000 rpm at the PTO, which the IMT 569 De Luxe does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 265” | No figureNo call on PTO independence: not stated for the 569 De Luxe. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “IMT 569” | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 265” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1986–1996 | 1975–1985 | Ahead (a fact, not an advantage)The IMT 569 De Luxe is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson 265 has 77% more hydraulic flow (11.5 L/min / 3.0 gpm) than the IMT 569 De Luxe (both pump flow, as stated by the source).
- The IMT 569 De Luxe has 41% more lift (730 kg / 1,609 lb) than the Massey Ferguson 265 (both lift at the hitch ends, as stated by the source).
- The IMT 569 De Luxe has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson 265 (both top speed forward, as stated by the source).
- The Massey Ferguson 265 offers 1000 rpm at the PTO, which the IMT 569 De Luxe does not (as stated by the sources).
- The IMT 569 De Luxe is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources