IMT 569 De Luxe or Massey Ferguson MF 4320 (A)?

Which should you choose?

The figures split: the Massey Ferguson 4320 (A) is ahead on hydraulic flow; the IMT 569 De Luxe is ahead on three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for IMT 569 De Luxe and Massey Ferguson MF 4320 (A), with the call on each
Question569 De LuxeMF 4320 (A)Call
Which puts more power through the PTO shaft?37.4 kW (50.1 hp)Traktorenlexikon, “IMT 569”38 kW (51 hp)Traktorenlexikon, “Massey Ferguson MF 4320”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 569 De Luxe and the MF 4320 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 569 De Luxe and the MF 4320 (A).
Which pumps more oil for implements?15.0 L/min (4.0 gpm)Traktorenlexikon, “IMT 569”60.0 L/min (15.9 gpm)Traktorenlexikon, “Massey Ferguson MF 4320”AheadThe Massey Ferguson 4320 (A) has 300% more hydraulic flow (45.0 L/min / 11.9 gpm) than the IMT 569 De Luxe (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,530 kg (5,578 lb)Traktorenlexikon, “IMT 569”2,243 kg (4,946 lb)Traktorenlexikon, “Massey Ferguson MF 4320”AheadThe IMT 569 De Luxe has 13% more lift (287 kg / 632 lb) than the Massey Ferguson 4320 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,860 kg (6,305 lb)Traktorenlexikon, “IMT 569”2,385 kg (5,258 lb)Traktorenlexikon, “Massey Ferguson MF 4320”Ahead (a fact, not an advantage)The IMT 569 De Luxe is 20% heavier (475 kg / 1,047 lb) than the Massey Ferguson 4320 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?—5,200 kg (11,464 lb)Traktorenlexikon, “Massey Ferguson MF 4320”No figureNo call on maximum permissible mass: no figure on record for the 569 De Luxe.
Which has the wider choice of gears?10Traktorenlexikon, “IMT 569”8Traktorenlexikon, “Massey Ferguson MF 4320”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 569 De Luxe and the MF 4320 (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “IMT 569”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 4320”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “IMT 569”540/540E rpmTraktorenlexikon, “Massey Ferguson MF 4320”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Massey Ferguson MF 4320”No figureNo call on PTO independence: not stated for the 569 De Luxe.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “IMT 569”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 4320”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1986–19962001–2003Ahead (a fact, not an advantage)The Massey Ferguson 4320 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 4320 (A) has 300% more hydraulic flow (45.0 L/min / 11.9 gpm) than the IMT 569 De Luxe (both pump flow, as stated by the source).
  • The IMT 569 De Luxe has 13% more lift (287 kg / 632 lb) than the Massey Ferguson 4320 (A) (both lift at the hitch ends, as stated by the source).
  • The IMT 569 De Luxe is 20% heavier (475 kg / 1,047 lb) than the Massey Ferguson 4320 (A) (both unladen weight, as stated by the source).
  • The Massey Ferguson 4320 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources