8 material differences · fewer than 12
Tractor oneIMT 5601980–1986No measured PTO figureTractor twoSteyr Plus 501967–1977No measured PTO figure
Which should you choose?
Read our verdict on the 560 and the Plus 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 560 | Plus 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 49.3 hp | +16% 560 |
| Engine declared | IMT-PERKINS M-34/T | Steyr WD-407.40 or WD-408.81 | differs |
| Displacement declared | 3.33 L | — | — |
| Maximum torque declared | 144 lb·ft · 195 N·m | 145 lb·ft · 196 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 16.8 mph · 27 km/h | +11% 560 |
| Clutch declared | Pedal-operated dry two-stage double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.7 gpm · 32.8 L/min | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,445 lb · 2,470 kg | 4,773 lb · 2,165 kg | +14% 560 |
| Maximum permissible mass declared | — | 8,818 lb · 4,000 kg | — |
| Wheelbase declared | 87.0 in · 2,210 mm | 83.7 in · 2,125 mm | — |
| Length declared | 156.5 in · 3,975 mm | 138.2 in · 3,510 mm | +13% 560 |
| Width declared | 69.3 in · 1,760 mm | 66.1–70.9 in · 1,678–1,800 mm | — |
| Ground clearance declared | 17.1 in · 434 mm | 15.7 in · 400 mm | +9% 560 |
| Turning radius, braked declared | 13.2 ft · 4.03 m | 11.3 ft · 3.43 m | +17% 560 |
| Fuel tank declared | 95.1–116.2 qt · 90.0–110.0 L | 87.7 qt · 83.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
IMT 560 sources
Source
- Source: Traktorenlexikon, “IMT 560”
Steyr Plus 50 sources
Source
- Source: Traktorenlexikon, “Steyr Plus 50”