IMT 555 or Renault 86?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 555 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 86 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault 86 suits loader and hydraulic implement work better on this data: 57% (8.6 L/min / 2.3 gpm) more hydraulic flow and 53% (620 kg / 1,367 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for IMT 555 and Renault 86, with the call on each
Question55586Call
Which puts more power through the PTO shaft?36.8 kW (49.3 hp)Traktorenlexikon, “IMT 555”36.8 kW (49.3 hp)Traktorenlexikon, “Renault 86 R7281”Not comparableNot comparable on power at the PTO shaft: the 555 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 86 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 555 and the 86.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 555 and the 86.
Which pumps more oil for implements?15.1 L/min (4.0 gpm)Traktorenlexikon, “IMT 555”23.7 L/min (6.3 gpm)Traktorenlexikon, “Renault 86 R7281”AheadThe Renault 86 has 57% more hydraulic flow (8.6 L/min / 2.3 gpm) than the IMT 555 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,180 kg (2,601 lb)Traktorenlexikon, “IMT 555”1,800 kg (3,968 lb)Traktorenlexikon, “Renault 86 R7281”AheadThe Renault 86 has 53% more lift (620 kg / 1,367 lb) than the IMT 555 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,870 kg (4,123 lb)Traktorenlexikon, “IMT 555”1,975 kg (4,354 lb)Traktorenlexikon, “Renault 86 R7281”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 555 and the 86.
Which has the wider choice of gears?6Traktorenlexikon, “IMT 555”8Traktorenlexikon, “Renault 86 R7281”AheadThe Renault 86 has 33% more forward gears (2 gears) than the IMT 555 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 555 and the 86.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “IMT 555”25 km/h (15.5 mph)Traktorenlexikon, “Renault 86 R7281”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “IMT 555”540 rpmTraktorenlexikon, “Renault 86 R7281”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Renault 86 R7281”No figureNo call on PTO independence: not stated for the 555.
Which drives on both axles?2WDTraktorenlexikon, “IMT 555”2WDTraktorenlexikon, “Renault 86 R7281”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1964–19711967–1973EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault 86 has 57% more hydraulic flow (8.6 L/min / 2.3 gpm) than the IMT 555 (both pump flow, as stated by the source).
  • The Renault 86 has 53% more lift (620 kg / 1,367 lb) than the IMT 555 (both lift at the hitch ends, as stated by the source).
  • The Renault 86 has 33% more forward gears (2 gears) than the IMT 555 (both forward gears, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 555 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 86 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources