11 material differences · fewer than 12

Tractor oneIMT 5551964–1971No measured PTO figureTractor twoLandini R-5500 (DT) "TL 22 N/A"1973–1983No measured PTO figure

Which should you choose?

Read our verdict on the 555 and the R-5500 (DT) "TL 22 N/A" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

11 material differences · 4 fields identical or within 5%, which is not counted as material

IMT 555 and Landini R-5500 (DT) "TL 22 N/A", field by field
Field555R-5500 (DT) "TL 22 N/A"Gap
Engine
Engine power, claimed claimed49.3 hp49.3 hp—
Engine declaredIMR-PERKINS O-34/TAPerkins AD 3.152 Sdiffers
Displacement declared3.34 L2.50 L+33% 555
Maximum torque declared141 lb·ft · 191 N·m128 lb·ft · 173 N·m+10% 555
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declaredPedal operated dry two-stage double clutch——
Hydraulics & hitch
Pump flow declared4.0 gpm · 15.1 L/min7.6 gpm · 28.6 L/min+89% R-5500 (DT) "TL 22 N/A"
Three-point lift, at the coupling points declared2,601 lb · 1,180 kg4,519 lb · 2,050 kg+74% R-5500 (DT) "TL 22 N/A"
Rear PTO speeds declared540 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared4,123 lb · 1,870 kg4,431 lb · 2,010 kg+7% R-5500 (DT) "TL 22 N/A"
Wheelbase declared84.8 in · 2,155 mm81.9 in · 2,080 mm—
Length declared137.2 in · 3,485 mm138.6 in · 3,520 mm—
Width declared66.9 in · 1,700 mm69.3–89.0 in · 1,760–2,260 mmdiffers
Ground clearance declared23.9 in · 607 mm16.5 in · 420 mm+45% 555
Turning radius, braked declared12.3 ft · 3.75 m10.9 ft · 3.31 m+13% 555
Fuel tank declared47.6 qt · 45.0 L64.5 qt · 61.0 L+36% R-5500 (DT) "TL 22 N/A"

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

IMT 555 sources

Source
  • Source: Traktorenlexikon, “IMT 555”

Landini R-5500 (DT) "TL 22 N/A" sources

Source
  • Source: Traktorenlexikon, “Landini 5500”
  • Source: Traktorenlexikon, “Massey Ferguson MF 255”