IMT 549 (DV-E) or OLIVER 1265?
Which should you choose?
On performance, every comparable figure that differs favours the OLIVER 1265: hydraulic flow. It is also ahead on drive. On features, the IMT 549 (DV-E) is ahead on top speed.
- The OLIVER 1265 suits loader and hydraulic implement work better on this data: 40% (6.2 L/min / 1.6 gpm) more hydraulic flow.
- The IMT 549 (DV-E) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 549 (DV-E) | 1265 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 28.8 kW (38.7 hp)Traktorenlexikon, “IMT 549” | 28.7 kW (38.5 hp)Traktorenlexikon, “Oliver 1265” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 549 (DV-E) and the 1265. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 549 (DV-E) and the 1265. |
| Which pumps more oil for implements? | 15.6 L/min (4.1 gpm)Traktorenlexikon, “IMT 549” | 21.8 L/min (5.8 gpm)Traktorenlexikon, “Oliver 1265” | AheadThe OLIVER 1265 has 40% more hydraulic flow (6.2 L/min / 1.6 gpm) than the IMT 549 (DV-E) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,417 kg (3,124 lb)Traktorenlexikon, “IMT 549” | — | No figureNo call on three-point lift: no figure on record for the 1265. |
| Which is heavier, for traction? | 2,090 kg (4,608 lb)Traktorenlexikon, “IMT 549” | 1,870 kg (4,123 lb)Traktorenlexikon, “Oliver 1265” | Ahead (a fact, not an advantage)The IMT 549 (DV-E) is 12% heavier (220 kg / 485 lb) than the OLIVER 1265 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 549 (DV-E) and the 1265. |
| Which has the wider choice of gears? | 10Traktorenlexikon, “IMT 549” | 6 to 9Traktorenlexikon, “Oliver 1265” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | YesTraktorenlexikon, “Oliver 1265” | No figureNo call on a creeper range: not stated for the 549 (DV-E). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “IMT 549” | 25 km/h (15.5 mph)Traktorenlexikon, “Oliver 1265” | AheadThe IMT 549 (DV-E) has 20% more top speed (5.0 km/h / 3.1 mph) than the OLIVER 1265 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “IMT 549” | 540 rpmTraktorenlexikon, “Oliver 1265” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Oliver 1265” | No figureNo call on PTO independence: not stated for the 549 (DV-E). |
| Which drives on both axles? | 2WDTraktorenlexikon, “IMT 549” | Two-wheel or four-wheel driveTraktorenlexikon, “Oliver 1265” | AheadThe OLIVER 1265 is available with four-wheel drive; the IMT 549 (DV-E) is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1986–1996 | 1971–1975 | Ahead (a fact, not an advantage)The IMT 549 (DV-E) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The OLIVER 1265 has 40% more hydraulic flow (6.2 L/min / 1.6 gpm) than the IMT 549 (DV-E) (both pump flow, as stated by the source).
- The IMT 549 (DV-E) is 12% heavier (220 kg / 485 lb) than the OLIVER 1265 (both unladen weight, as stated by the source).
- The IMT 549 (DV-E) has 20% more top speed (5.0 km/h / 3.1 mph) than the OLIVER 1265 (both top speed forward, as stated by the source).
- The OLIVER 1265 is available with four-wheel drive; the IMT 549 (DV-E) is two-wheel drive (as stated by the sources).
- The IMT 549 (DV-E) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540 rpm).
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources