IMR-RAKOVICA R-60 vs VALMET 504
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1967–1967; 1982–1985). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | R-60 | 504 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | IMR-PERKINS M-34/T | VALMET D 27 B | differs |
| Displacement declared | 3.34 L | 2.69 L | +24% R-60 |
| Maximum torque declared | 138 lb·ft · 187 N·m | 125 lb·ft · 170 N·m | +10% R-60 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated, two-stage dry IKARUS double clutch | dry Fichtel & Sachs dual clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.5 gpm · 36.1 L/min | 7.1 gpm · 27.0 L/min | +34% R-60 |
| Three-point lift at ends declared | — | 3,957 lb · 1,795 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,784 lb · 2,170 kg | 5,930 lb · 2,690 kg | +24% 504 |
| Wheelbase declared | 80.7 in · 2,050 mm | 83.1 in · 2,112 mm | — |
| Length declared | 149.6 in · 3,800 mm | 142.4 in · 3,617 mm | — |
| Width declared | 73.2 in · 1,860 mm | 74.4 in · 1,890 mm | — |
| Height declared | 63.8 in · 1,620 mm | 98.4 in · 2,500 mm | +54% 504 |
| Ground clearance declared | 17.7 in · 450 mm | 15.7 in · 400 mm | +13% R-60 |
| Turning radius, braked declared | 11.2 ft · 3.41 m | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 68.7 qt · 65.0 L | +8% 504 |
IMR-RAKOVICA R-60 sources
Source
- Source: Traktorenlexikon, “Rakovica R 60”
- Source: Traktorenlexikon, “IMT 558”
VALMET 504 sources
Source
- Source: Traktorenlexikon, “Valmet 504”