IMR-RAKOVICA R-76 Standard or Renault 85-14 TS A?
Which should you choose?
On performance, every comparable figure that differs favours the Renault 85-14 TS A: hydraulic flow and three-point lift. It is also ahead on forward gears, PTO speeds and drive.
- The Renault 85-14 TS A suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The Renault 85-14 TS A suits loader and hydraulic implement work better on this data: 38% (11.5 L/min / 3.0 gpm) more hydraulic flow and 65% (1,510 kg / 3,329 lb) more three-point lift.
- The Renault 85-14 TS A suits heavy draft work (ploughing, cultivating) better on this data: 89% (2,025 kg / 4,464 lb) heavier and four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | R-76 Standard | 85-14 TS A | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 47.9 kW (64.2 hp)Traktorenlexikon, “Rakovica R 76” | 48.0 kW (64.4 hp)Traktorenlexikon, “Renault 85-14 TS-TX R7762” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the R-76 Standard and the 85-14 TS A. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the R-76 Standard and the 85-14 TS A. |
| Which pumps more oil for implements? | 29.9 L/min (7.9 gpm)Traktorenlexikon, “Rakovica R 76” | 41.4 L/min (10.9 gpm)Traktorenlexikon, “Renault 85-14 TS-TX R7762” | AheadThe Renault 85-14 TS A has 38% more hydraulic flow (11.5 L/min / 3.0 gpm) than the IMR-RAKOVICA R-76 Standard (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,315 kg (5,104 lb)Traktorenlexikon, “Rakovica R 76” | 3,825 kg (8,433 lb)Traktorenlexikon, “Renault 85-14 TS-TX R7762” | AheadThe Renault 85-14 TS A has 65% more lift (1,510 kg / 3,329 lb) than the IMR-RAKOVICA R-76 Standard (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,265 kg (4,993 lb)Traktorenlexikon, “Rakovica R 76” | 4,290 kg (9,458 lb)Traktorenlexikon, “Renault 85-14 TS-TX R7762” | Ahead (a fact, not an advantage)The Renault 85-14 TS A is 89% heavier (2,025 kg / 4,464 lb) than the IMR-RAKOVICA R-76 Standard (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the R-76 Standard and the 85-14 TS A. |
| Which has the wider choice of gears? | 6Traktorenlexikon, “Rakovica R 76” | 12 to 24Traktorenlexikon, “Renault 85-14 TS-TX R7762” | AheadThe Renault 85-14 TS A has 100% more forward gears (6 gears) than the IMR-RAKOVICA R-76 Standard (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the R-76 Standard and the 85-14 TS A. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Rakovica R 76” | 30 km/h (18.6 mph)Traktorenlexikon, “Renault 85-14 TS-TX R7762” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Rakovica R 76” | 540/1000 rpmTraktorenlexikon, “Renault 85-14 TS-TX R7762” | AheadThe Renault 85-14 TS A offers 1000 rpm at the PTO, which the IMR-RAKOVICA R-76 Standard does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Rakovica R 76” | independentTraktorenlexikon, “Renault 85-14 TS-TX R7762” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Rakovica R 76” | 4WDTraktorenlexikon, “Renault 85-14 TS-TX R7762” | AheadThe Renault 85-14 TS A is available with four-wheel drive; the IMR-RAKOVICA R-76 Standard is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1979–1989 | 1986–1989 | Ahead (a fact, not an advantage)The Renault 85-14 TS A is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Renault 85-14 TS A has 38% more hydraulic flow (11.5 L/min / 3.0 gpm) than the IMR-RAKOVICA R-76 Standard (both pump flow, as stated by the source).
- The Renault 85-14 TS A has 65% more lift (1,510 kg / 3,329 lb) than the IMR-RAKOVICA R-76 Standard (both lift at the hitch ends, as stated by the source).
- The Renault 85-14 TS A is 89% heavier (2,025 kg / 4,464 lb) than the IMR-RAKOVICA R-76 Standard (both unladen weight, as stated by the source).
- The Renault 85-14 TS A has 100% more forward gears (6 gears) than the IMR-RAKOVICA R-76 Standard (both forward gears, as stated by the source).
- The Renault 85-14 TS A offers 1000 rpm at the PTO, which the IMR-RAKOVICA R-76 Standard does not (as stated by the sources).
- The Renault 85-14 TS A is available with four-wheel drive; the IMR-RAKOVICA R-76 Standard is two-wheel drive (as stated by the sources).
- The Renault 85-14 TS A is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources