Hürlimann XT 910.4 or New Holland T 5060?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland T 5060: hydraulic flow and maximum permissible mass. On features, the Hürlimann XT 910.4 is ahead on forward gears.
- The New Holland T 5060 suits loader and hydraulic implement work better on this data: 43% (20.1 L/min / 5.3 gpm) more hydraulic flow.
- The New Holland T 5060 suits road haulage better on this data: 13% (800 kg / 1,764 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | XT 910.4 | T 5060 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 70.4 kW (94.4 hp)Traktorenlexikon, “Hürlimann XT 910.4” | 69.9 kW (93.7 hp)Traktorenlexikon, “New Holland T5060” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the XT 910.4 and the T 5060. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the XT 910.4 and the T 5060. |
| Which pumps more oil for implements? | 47.0 L/min (12.4 gpm)Traktorenlexikon, “Hürlimann XT 910.4” | 67.1 L/min (17.7 gpm)Traktorenlexikon, “New Holland T5060” | AheadThe New Holland T 5060 has 43% more hydraulic flow (20.1 L/min / 5.3 gpm) than the Hürlimann XT 910.4 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,375 kg (7,441 lb)Traktorenlexikon, “Hürlimann XT 910.4” | 5,740 kg (12,655 lb)Traktorenlexikon, “New Holland T5060” | Not comparableNot comparable on three-point lift: the XT 910.4: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 910.4”); the T 5060: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland T5060”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 4,410 kg (9,722 lb)Traktorenlexikon, “Hürlimann XT 910.4” | 3,835 kg (8,455 lb)Traktorenlexikon, “New Holland T5060” | Ahead (a fact, not an advantage)The Hürlimann XT 910.4 is 15% heavier (575 kg / 1,268 lb) than the New Holland T 5060 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “Hürlimann XT 910.4” | 6,800 kg (14,991 lb)Traktorenlexikon, “New Holland T5060” | AheadThe New Holland T 5060 has 13% higher maximum permissible mass (800 kg / 1,764 lb) than the Hürlimann XT 910.4 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 45 to 60Traktorenlexikon, “Hürlimann XT 910.4” | 12 to 24Traktorenlexikon, “New Holland T5060” | AheadThe Hürlimann XT 910.4 has 88% more forward gears (21 gears) than the New Holland T 5060 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the XT 910.4 and the T 5060. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XT 910.4” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland T5060” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann XT 910.4” | 540/540E/1000 rpmTraktorenlexikon, “New Holland T5060” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland T5060” | No figureNo call on PTO independence: not stated for the XT 910.4. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann XT 910.4” | 2WD / 4WDTraktorenlexikon, “New Holland T5060” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 2008–2012 | Ahead (a fact, not an advantage)The New Holland T 5060 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland T 5060 has 43% more hydraulic flow (20.1 L/min / 5.3 gpm) than the Hürlimann XT 910.4 (both pump flow, as stated by the source).
- The Hürlimann XT 910.4 is 15% heavier (575 kg / 1,268 lb) than the New Holland T 5060 (both unladen weight, as stated by the source).
- The New Holland T 5060 has 13% higher maximum permissible mass (800 kg / 1,764 lb) than the Hürlimann XT 910.4 (both maximum permissible mass, as stated by the source).
- The Hürlimann XT 910.4 has 88% more forward gears (21 gears) than the New Holland T 5060 (both forward gears, as stated by the source).
- The New Holland T 5060 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the XT 910.4: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 910.4”); the T 5060: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland T5060”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources