Hürlimann XT 910.4 or Lamborghini 1060 DT?
Which should you choose?
The figures split: the Hürlimann XT 910.4 is ahead on hydraulic flow; the Lamborghini 1060 DT is ahead on maximum permissible mass.
- The Hürlimann XT 910.4 suits loader and hydraulic implement work better on this data: 15% (6.0 L/min / 1.6 gpm) more hydraulic flow.
- The Lamborghini 1060 DT suits road haulage better on this data: 17% (1,000 kg / 2,205 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | XT 910.4 | 1060 DT | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 70.4 kW (94.4 hp)Traktorenlexikon, “Hürlimann XT 910.4” | 70.7 kW (94.8 hp)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the XT 910.4 and the 1060 DT. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the XT 910.4 and the 1060 DT. |
| Which pumps more oil for implements? | 47.0 L/min (12.4 gpm)Traktorenlexikon, “Hürlimann XT 910.4” | 41.0 L/min (10.8 gpm)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | AheadThe Hürlimann XT 910.4 has 15% more hydraulic flow (6.0 L/min / 1.6 gpm) than the Lamborghini 1060 DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,375 kg (7,441 lb)Traktorenlexikon, “Hürlimann XT 910.4” | 4,700 kg (10,362 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | Not comparableNot comparable on three-point lift: the XT 910.4: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 910.4”); the 1060 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini Premium 1060 DT A”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 4,410 kg (9,722 lb)Traktorenlexikon, “Hürlimann XT 910.4” | 4,720 kg (10,406 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “Hürlimann XT 910.4” | 7,000 kg (15,432 lb)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | AheadThe Lamborghini 1060 DT has 17% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Hürlimann XT 910.4 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 45 to 60Traktorenlexikon, “Hürlimann XT 910.4” | 20 to 60Traktorenlexikon, “Lamborghini Premium 1060 DT A” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the XT 910.4 and the 1060 DT. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XT 910.4” | 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Premium 1060 DT A” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann XT 910.4” | 540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini Premium 1060 DT A” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the XT 910.4 and the 1060 DT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann XT 910.4” | 4WDTraktorenlexikon, “Lamborghini Premium 1060 DT A” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 1995–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hürlimann XT 910.4 has 15% more hydraulic flow (6.0 L/min / 1.6 gpm) than the Lamborghini 1060 DT (both pump flow, as stated by the source).
- The Lamborghini 1060 DT has 17% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Hürlimann XT 910.4 (both maximum permissible mass, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on three-point lift: the XT 910.4: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 910.4”); the 1060 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini Premium 1060 DT A”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources