Hürlimann XE 70 Tradition or Massey Ferguson MF 4225 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the XE 70 Tradition has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4225 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Hürlimann XE 70 Tradition suits loader and hydraulic implement work better on this data: 22% (550 kg / 1,213 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann XE 70 Tradition and Massey Ferguson MF 4225 (A), with the call on each
QuestionXE 70 TraditionMF 4225 (A)Call
Which puts more power through the PTO shaft?49.3 kW (66.1 hp)Traktorenlexikon, “Hürlimann XE 70 Tradition”47.8 kW (64.1 hp)Traktorenlexikon, “Massey Ferguson MF 4225”Not comparableNot comparable on power at the PTO shaft: the XE 70 Tradition has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4225 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the XE 70 Tradition and the MF 4225 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the XE 70 Tradition and the MF 4225 (A).
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the XE 70 Tradition and the MF 4225 (A).
Which lifts more on the three-point hitch?3,000 kg (6,614 lb)Traktorenlexikon, “Hürlimann XE 70 Tradition”2,450 kg (5,401 lb)Traktorenlexikon, “Massey Ferguson MF 4225”AheadThe Hürlimann XE 70 Tradition has 22% more lift (550 kg / 1,213 lb) than the Massey Ferguson MF 4225 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,350 kg (5,181 lb)Traktorenlexikon, “Hürlimann XE 70 Tradition”3,490 kg (7,694 lb)Traktorenlexikon, “Massey Ferguson MF 4225”Ahead (a fact, not an advantage)The Massey Ferguson MF 4225 (A) is 49% heavier (1,140 kg / 2,513 lb) than the Hürlimann XE 70 Tradition (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,500 kg (14,330 lb)Traktorenlexikon, “Massey Ferguson MF 4225”No figureNo call on maximum permissible mass: no figure on record for the XE 70 Tradition.
Which has the wider choice of gears?20 to 30Traktorenlexikon, “Hürlimann XE 70 Tradition”12 to 18Traktorenlexikon, “Massey Ferguson MF 4225”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the XE 70 Tradition and the MF 4225 (A).
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XE 70 Tradition”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 4225”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E rpmTraktorenlexikon, “Hürlimann XE 70 Tradition”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 4225”AheadThe Massey Ferguson MF 4225 (A) offers 1000 rpm at the PTO, which the Hürlimann XE 70 Tradition does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Hürlimann XE 70 Tradition”No figureNo call on PTO independence: not stated for the MF 4225 (A).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Hürlimann XE 70 Tradition”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 4225”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2005–20091997–2001Ahead (a fact, not an advantage)The Hürlimann XE 70 Tradition is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann XE 70 Tradition has 22% more lift (550 kg / 1,213 lb) than the Massey Ferguson MF 4225 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 4225 (A) is 49% heavier (1,140 kg / 2,513 lb) than the Hürlimann XE 70 Tradition (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 4225 (A) offers 1000 rpm at the PTO, which the Hürlimann XE 70 Tradition does not (as stated by the sources).
  • The Hürlimann XE 70 Tradition is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the XE 70 Tradition has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 4225 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources