12 material differences

Tractor oneHürlimann XE 70 Tradition2005–2009No measured PTO figureTractor twoJohn Deere 5325 (A)2005–2008No measured PTO figure

Which should you choose?

Read our verdict on the XE 70 Tradition and the 5325 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 2 fields identical or within 5%, which is not counted as material

Hürlimann XE 70 Tradition and John Deere 5325 (A), field by field
FieldXE 70 Tradition5325 (A)Gap
Engine
Engine power, claimed claimed66.1 hp66.1 hp—
Engine declaredSAME-DEUTZ-FAHR 1000.3 WT (EURO-II)John Deere-PowerTech 5.030 T 027differs
Displacement declared3.00 L3.05 L—
Maximum torque declared192 lb·ft · 260 N·m181 lb·ft · 245 N·m+6% XE 70 Tradition
Transmission
Top speed declared24.9 mph · 40 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredPedal operated dry single plate clutchPedal operated dry double clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Hydraulic control declaredLoad sensing——
Pump flow declared—14.1 gpm · 53.4 L/min—
Pressure declared—3,408 psi · 235 bar—
Three-point lift, at the coupling points declared6,614 lb · 3,000 kg4,685 lb · 2,125 kg+41% XE 70 Tradition
Rear PTO speeds declared540/540E rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared5,181 lb · 2,350 kg5,994 lb · 2,719 kg+16% 5325 (A)
Wheelbase declared80.9 in · 2,055 mm85.7 in · 2,178 mm+6% 5325 (A)
Length declared128.7 in · 3,270 mm137.8 in · 3,500 mm+7% 5325 (A)
Width declared70.1–85.8 in · 1,780–2,180 mm72.9 in · 1,852 mmdiffers
Ground clearance declared15.0 in · 380 mm19.3 in · 490 mm+29% 5325 (A)
Fuel tank declared52.8 qt · 50.0 L100.0 qt · 94.6 L+89% 5325 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hürlimann XE 70 Tradition sources

Source
  • Source: Traktorenlexikon, “Hürlimann XE 70 Tradition”

John Deere 5325 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 5325”
  • Source: Traktorenlexikon, “John Deere 5225”