Hürlimann Prince 445 DT or New Holland 3235?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland 3235: hydraulic flow. On features, the Hürlimann Prince 445 DT is ahead on PTO speeds and drive.
- The Hürlimann Prince 445 DT suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The New Holland 3235 suits loader and hydraulic implement work better on this data: 400% (28.0 L/min / 7.4 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Prince 445 DT | 3235 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 26.1 kW (35.0 hp)Traktorenlexikon, “Hürlimann Prince 445” | 25.1 kW (33.7 hp)Traktorenlexikon, “New Holland 3235” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Prince 445 DT and the 3235. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Prince 445 DT and the 3235. |
| Which pumps more oil for implements? | 7.0 L/min (1.8 gpm)Traktorenlexikon, “Hürlimann Prince 445” | 35.0 L/min (9.2 gpm)Traktorenlexikon, “New Holland 3235” | AheadThe New Holland 3235 has 400% more hydraulic flow (28.0 L/min / 7.4 gpm) than the Hürlimann Prince 445 DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 1,690 kg (3,726 lb)Traktorenlexikon, “New Holland 3235” | No figureNo call on three-point lift: no figure on record for the Prince 445 DT. |
| Which is heavier, for traction? | 1,240 kg (2,734 lb)Traktorenlexikon, “Hürlimann Prince 445” | 1,720 kg (3,792 lb)Traktorenlexikon, “New Holland 3235” | Ahead (a fact, not an advantage)The New Holland 3235 is 39% heavier (480 kg / 1,058 lb) than the Hürlimann Prince 445 DT (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Prince 445 DT and the 3235. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Hürlimann Prince 445” | 12 to 20Traktorenlexikon, “New Holland 3235” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | YesTraktorenlexikon, “New Holland 3235” | No figureNo call on a creeper range: not stated for the Prince 445 DT. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann Prince 445” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland 3235” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Hürlimann Prince 445” | 540 rpmTraktorenlexikon, “New Holland 3235” | AheadThe Hürlimann Prince 445 DT offers 1000 rpm at the PTO, which the New Holland 3235 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland 3235” | No figureNo call on PTO independence: not stated for the Prince 445 DT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann Prince 445” | 2WDTraktorenlexikon, “New Holland 3235” | AheadThe Hürlimann Prince 445 DT is available with four-wheel drive; the New Holland 3235 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1995–1999 | 1996–1999 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland 3235 has 400% more hydraulic flow (28.0 L/min / 7.4 gpm) than the Hürlimann Prince 445 DT (both pump flow, as stated by the source).
- The New Holland 3235 is 39% heavier (480 kg / 1,058 lb) than the Hürlimann Prince 445 DT (both unladen weight, as stated by the source).
- The Hürlimann Prince 445 DT offers 1000 rpm at the PTO, which the New Holland 3235 does not (as stated by the sources).
- The Hürlimann Prince 445 DT is available with four-wheel drive; the New Holland 3235 is two-wheel drive (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources