Hürlimann XN-709 or Lamborghini Agile 990 S/DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the XN-709 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agile 990 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann XN-709 and Lamborghini Agile 990 S/DT, with the call on each
QuestionXN-709Agile 990 S/DTCall
Which puts more power through the PTO shaft?64.8 kW (86.9 hp)Traktorenlexikon, “Hürlimann XN 709”64.7 kW (86.8 hp)Traktorenlexikon, “Lamborghini Agile S 990”Not comparableNot comparable on power at the PTO shaft: the XN-709 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agile 990 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the XN-709 and the Agile 990 S/DT.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the XN-709 and the Agile 990 S/DT.
Which pumps more oil for implements?34.9 L/min (9.2 gpm)Traktorenlexikon, “Hürlimann XN 709”36.1 L/min (9.5 gpm)Traktorenlexikon, “Lamborghini Agile S 990”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?1,780 kg (3,924 lb)Traktorenlexikon, “Hürlimann XN 709”2,600 kg (5,732 lb)Traktorenlexikon, “Lamborghini Agile S 990”Not comparableNot comparable on three-point lift: the XN-709: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XN 709”); the Agile 990 S/DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini Agile S 990”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,740 kg (6,041 lb)Traktorenlexikon, “Hürlimann XN 709”2,740 kg (6,041 lb)Traktorenlexikon, “Lamborghini Agile S 990”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the XN-709 and the Agile 990 S/DT.
Which has the wider choice of gears?45Traktorenlexikon, “Hürlimann XN 709”16 to 45Traktorenlexikon, “Lamborghini Agile S 990”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the XN-709 and the Agile 990 S/DT.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XN 709”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Agile S 990”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann XN 709”540/540E/1000 rpmTraktorenlexikon, “Lamborghini Agile S 990”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Lamborghini Agile S 990”No figureNo call on PTO independence: not stated for the XN-709.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann XN 709”; OECD test report 1828, 19994WDTraktorenlexikon, “Lamborghini Agile S 990”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1999–20031996–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the XN-709 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agile 990 S/DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the XN-709: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XN 709”); the Agile 990 S/DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Lamborghini Agile S 990”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources