Hürlimann XN-707 vs John Deere 5410 (A)

14 material differences

Tractor one

1998–2003

No measured PTO figure

Tractor two

1997–2000

No measured PTO figure

Which should you choose?

Read our verdict on the XN-707 and the 5410 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 0 fields identical or within 5%, which is not counted as material

Hürlimann XN-707 and John Deere 5410 (A), field by field
Field	XN-707	5410 (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	79.9 hp	+16% 5410 (A)
Engine declared	Hürlimann 1000.3 WT-1	John Deere-PowerTech 4.045 D	differs
Displacement declared	3.00 L	4.52 L	+51% 5410 (A)
Maximum torque declared	184 lb·ft · 250 N·m	204 lb·ft · 277 N·m	+11% 5410 (A)
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% XN-707
Clutch declared	Pedal-operated dry SDF single-disc clutch as driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	6.6 gpm · 25.0 L/min	16.3 gpm · 61.7 L/min	+147% 5410 (A)
Pressure declared	3,046 psi · 210 bar	3,408 psi · 235 bar	+12% 5410 (A)
Three-point lift at ends declared	—	3,616 lb · 1,640 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,412 lb · 2,455 kg	5,999 lb · 2,721 kg	+11% 5410 (A)
Wheelbase declared	75.8 in · 1,926 mm	85.7 in · 2,177 mm	+13% 5410 (A)
Length declared	135.1 in · 3,431 mm	125.9 in · 3,198 mm	+7% XN-707
Width declared	50.8 in · 1,290 mm	68.7 in · 1,745 mm	+35% 5410 (A)
Height declared	83.1 in · 2,110 mm	97.0 in · 2,464 mm	+17% 5410 (A)
Ground clearance declared	9.1 in · 230 mm	18.1 in · 460 mm	+100% 5410 (A)
Turning radius, braked declared	13.4 ft · 4.07 m	—	—
Fuel tank declared	61.3 qt · 58.0 L	71.9 qt · 68.0 L	+17% 5410 (A)

Source

Source