Hürlimann H-481 XF vs SAME Silver 80 (DT)

14 material differences

Tractor one

1992–2000

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the H-481 XF and the Silver 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-481 XF and SAME Silver 80 (DT), field by field
Field	H-481 XF	Silver 80 (DT)	Gap
Engine
Engine power, claimed claimed	79.0 hp	78.9 hp	—
Engine declared	Hürlimann 1000.4 W-3	SAME-DEUTZ-FAHR 1000.4 A 4	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	190 lb·ft · 258 N·m	180 lb·ft · 244 N·m	+6% H-481 XF
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal-operated dry SLH single-plate clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.1 gpm · 27.0 L/min	10.5 gpm · 39.8 L/min	+47% Silver 80 (DT)
Pressure declared	2,901 psi · 200 bar	3,118 psi · 215 bar	+8% Silver 80 (DT)
Three-point lift at ends declared	—	7,937 lb · 3,600 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,952 lb · 2,700 kg	7,937 lb · 3,600 kg	+33% Silver 80 (DT)
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	82.0 in · 2,082 mm	97.2 in · 2,470 mm	+19% Silver 80 (DT)
Length declared	149.5 in · 3,797 mm	161.6 in · 4,105 mm	+8% Silver 80 (DT)
Width declared	61.4 in · 1,560 mm	72.4 in · 1,840 mm	+18% Silver 80 (DT)
Height declared	95.7 in · 2,430 mm	105.3 in · 2,675 mm	+10% Silver 80 (DT)
Ground clearance declared	13.8 in · 350 mm	20.3 in · 515 mm	+47% Silver 80 (DT)
Turning radius, braked declared	12.7 ft · 3.86 m	10.5 ft · 3.20 m	+21% H-481 XF
Fuel tank declared	74.0 qt · 70.0 L	158.5 qt · 150.0 L	+114% Silver 80 (DT)

Source

Source