Hürlimann H-481 XF vs Landini 7800-Turbo (DT)

11 material differences · fewer than 12

Tractor one

1992–2000

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the H-481 XF and the 7800-Turbo (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-481 XF and Landini 7800-Turbo (DT), field by field
Field	H-481 XF	7800-Turbo (DT)	Gap
Engine
Engine power, claimed claimed	79.0 hp	82.9 hp	—
Engine declared	Hürlimann 1000.4 W-3	Perkins LT 4.236	differs
Displacement declared	4.00 L	3.86 L	—
Maximum torque declared	190 lb·ft · 258 N·m	237 lb·ft · 322 N·m	+25% 7800-Turbo (DT)
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% H-481 XF
Clutch declared	Pedal-operated dry SLH single-plate clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.1 gpm · 27.0 L/min	13.5 gpm · 51.0 L/min	+89% 7800-Turbo (DT)
Pressure declared	2,901 psi · 200 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	7,804 lb · 3,540 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,952 lb · 2,700 kg	8,411 lb · 3,815 kg	+41% 7800-Turbo (DT)
Wheelbase declared	82.0 in · 2,082 mm	93.3 in · 2,371 mm	+14% 7800-Turbo (DT)
Length declared	149.5 in · 3,797 mm	157.1 in · 3,990 mm	—
Width declared	61.4 in · 1,560 mm	81.5 in · 2,070 mm	+33% 7800-Turbo (DT)
Height declared	95.7 in · 2,430 mm	108.7 in · 2,760 mm	+14% 7800-Turbo (DT)
Ground clearance declared	13.8 in · 350 mm	13.1 in · 332 mm	+5% H-481 XF
Turning radius, braked declared	12.7 ft · 3.86 m	—	—
Fuel tank declared	74.0 qt · 70.0 L	156.4 qt · 148.0 L	+111% 7800-Turbo (DT)

Source

Source