Hürlimann SX 1800 or New Holland T 7040?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7040 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Hürlimann SX 1800 suits loader and hydraulic implement work better on this data: 16% (1,353 kg / 2,983 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann SX 1800 and New Holland T 7040, with the call on each
QuestionSX 1800T 7040Call
Which puts more power through the PTO shaft?132.4 kW (177.6 hp)Traktorenlexikon, “Hürlimann SX 1800”133.9 kW (179.6 hp)Traktorenlexikon, “New Holland T7040 Power Command”Not comparableNot comparable on power at the PTO shaft: the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7040 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the SX 1800 and the T 7040.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the SX 1800 and the T 7040.
Which pumps more oil for implements?113.0 L/min (29.9 gpm)Traktorenlexikon, “Hürlimann SX 1800”121.0 L/min (32.0 gpm)Traktorenlexikon, “New Holland T7040 Power Command”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?10,000 kg (22,046 lb)Traktorenlexikon, “Hürlimann SX 1800”8,647 kg (19,063 lb)Traktorenlexikon, “New Holland T7040 Power Command”AheadThe Hürlimann SX 1800 has 16% more lift (1,353 kg / 2,983 lb) than the New Holland T 7040 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?7,100 kg (15,653 lb)Traktorenlexikon, “Hürlimann SX 1800”8,055 kg (17,758 lb)Traktorenlexikon, “New Holland T7040 Power Command”Ahead (a fact, not an advantage)The New Holland T 7040 is 13% heavier (955 kg / 2,105 lb) than the Hürlimann SX 1800 (both unladen weight, as stated by the source).
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “New Holland T7040 Power Command”No figureNo call on maximum permissible mass: no figure on record for the SX 1800.
Which has the wider choice of gears?18 to 27Traktorenlexikon, “Hürlimann SX 1800”18 to 19Traktorenlexikon, “New Holland T7040 Power Command”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the SX 1800 and the T 7040.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann SX 1800”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T7040 Power Command”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann SX 1800”540/540E/1000 rpmTraktorenlexikon, “New Holland T7040 Power Command”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Hürlimann SX 1800”independentTraktorenlexikon, “New Holland T7040 Power Command”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann SX 1800”4WDTraktorenlexikon, “New Holland T7040 Power Command”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2000–20042007–2011Ahead (a fact, not an advantage)The New Holland T 7040 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann SX 1800 has 16% more lift (1,353 kg / 2,983 lb) than the New Holland T 7040 (both lift at the hitch ends, as stated by the source).
  • The New Holland T 7040 is 13% heavier (955 kg / 2,105 lb) than the Hürlimann SX 1800 (both unladen weight, as stated by the source).
  • The New Holland T 7040 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7040 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources