Hürlimann SX 1800 or Massey Ferguson MF 3680?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3680 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Hürlimann SX 1800 suits loader and hydraulic implement work better on this data: 101% (56.7 L/min / 15.0 gpm) more hydraulic flow and 65% (3,940 kg / 8,686 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann SX 1800 and Massey Ferguson MF 3680, with the call on each
QuestionSX 1800MF 3680Call
Which puts more power through the PTO shaft?132.4 kW (177.6 hp)Traktorenlexikon, “Hürlimann SX 1800”132.5 kW (177.7 hp)Traktorenlexikon, “Massey Ferguson MF 3680”Not comparableNot comparable on power at the PTO shaft: the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3680 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the SX 1800 and the MF 3680.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the SX 1800 and the MF 3680.
Which pumps more oil for implements?113.0 L/min (29.9 gpm)Traktorenlexikon, “Hürlimann SX 1800”56.3 L/min (14.9 gpm)Traktorenlexikon, “Massey Ferguson MF 3680”AheadThe Hürlimann SX 1800 has 101% more hydraulic flow (56.7 L/min / 15.0 gpm) than the Massey Ferguson MF 3680 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?10,000 kg (22,046 lb)Traktorenlexikon, “Hürlimann SX 1800”6,060 kg (13,360 lb)Traktorenlexikon, “Massey Ferguson MF 3680”AheadThe Hürlimann SX 1800 has 65% more lift (3,940 kg / 8,686 lb) than the Massey Ferguson MF 3680 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?7,100 kg (15,653 lb)Traktorenlexikon, “Hürlimann SX 1800”5,799 kg (12,785 lb)Traktorenlexikon, “Massey Ferguson MF 3680”Ahead (a fact, not an advantage)The Hürlimann SX 1800 is 22% heavier (1,301 kg / 2,868 lb) than the Massey Ferguson MF 3680 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the SX 1800 and the MF 3680.
Which has the wider choice of gears?18 to 27Traktorenlexikon, “Hürlimann SX 1800”16Traktorenlexikon, “Massey Ferguson MF 3680”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the SX 1800 and the MF 3680.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann SX 1800”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3680”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann SX 1800”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3680”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Hürlimann SX 1800”No figureNo call on PTO independence: not stated for the MF 3680.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann SX 1800”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3680”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2000–20041989–1990Ahead (a fact, not an advantage)The Hürlimann SX 1800 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann SX 1800 has 101% more hydraulic flow (56.7 L/min / 15.0 gpm) than the Massey Ferguson MF 3680 (both pump flow, as stated by the source).
  • The Hürlimann SX 1800 has 65% more lift (3,940 kg / 8,686 lb) than the Massey Ferguson MF 3680 (both lift at the hitch ends, as stated by the source).
  • The Hürlimann SX 1800 is 22% heavier (1,301 kg / 2,868 lb) than the Massey Ferguson MF 3680 (both unladen weight, as stated by the source).
  • The Hürlimann SX 1800 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the SX 1800 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3680 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources