Hürlimann SX-1500 or SAME Titan 150?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the SX-1500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Hürlimann SX-1500 suits loader and hydraulic implement work better on this data: 15% (8.9 L/min / 2.4 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann SX-1500 and SAME Titan 150, with the call on each
QuestionSX-1500Titan 150Call
Which puts more power through the PTO shaft?110.4 kW (148.0 hp)Traktorenlexikon, “Hürlimann SX 1500”110.3 kW (147.9 hp)Traktorenlexikon, “SAME Titan 150”Not comparableNot comparable on power at the PTO shaft: the SX-1500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the SX-1500 and the Titan 150.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the SX-1500 and the Titan 150.
Which pumps more oil for implements?68.9 L/min (18.2 gpm)Traktorenlexikon, “Hürlimann SX 1500”60.0 L/min (15.9 gpm)Traktorenlexikon, “SAME Titan 150”AheadThe Hürlimann SX-1500 has 15% more hydraulic flow (8.9 L/min / 2.4 gpm) than the SAME Titan 150 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?8,600 kg (18,960 lb)Traktorenlexikon, “Hürlimann SX 1500”—No figureNo call on three-point lift: no figure on record for the Titan 150.
Which is heavier, for traction?6,845 kg (15,091 lb)Traktorenlexikon, “Hürlimann SX 1500”5,780 kg (12,743 lb)Traktorenlexikon, “SAME Titan 150”Ahead (a fact, not an advantage)The Hürlimann SX-1500 is 18% heavier (1,065 kg / 2,348 lb) than the SAME Titan 150 (both unladen weight, as stated by the source).
Which may carry more ballast and load?—8,500 kg (18,739 lb)Traktorenlexikon, “SAME Titan 150”No figureNo call on maximum permissible mass: no figure on record for the SX-1500.
Which has the wider choice of gears?18 to 27Traktorenlexikon, “Hürlimann SX 1500”26 to 27Traktorenlexikon, “SAME Titan 150”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Hürlimann SX 1500”—No figureNo call on a creeper range: not stated for the Titan 150.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann SX 1500”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “SAME Titan 150”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann SX 1500”540/1000 rpmTraktorenlexikon, “SAME Titan 150”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Hürlimann SX 1500”independentTraktorenlexikon, “SAME Titan 150”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann SX 1500”4WDTraktorenlexikon, “SAME Titan 150”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20041998–2001EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hürlimann SX-1500 has 15% more hydraulic flow (8.9 L/min / 2.4 gpm) than the SAME Titan 150 (both pump flow, as stated by the source).
  • The Hürlimann SX-1500 is 18% heavier (1,065 kg / 2,348 lb) than the SAME Titan 150 (both unladen weight, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the SX-1500 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Titan 150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources