Hürlimann SX 1350 vs VALMET 8400

13 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1993–2004

No measured PTO figure

Which should you choose?

Read our verdict on the SX 1350 and the 8400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann SX 1350 and VALMET 8400, field by field
Field	SX 1350	8400	Gap
Engine
Engine power, claimed claimed	133.2 hp	138.1 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.6 WT-3 V1	Valmet 620 DS	differs
Displacement declared	6.00 L	6.60 L	+10% 8400
Maximum torque declared	358 lb·ft · 485 N·m	384 lb·ft · 520 N·m	+7% 8400
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Hydraulic wet multi-disc clutch	Pedal operated dry Fichtel & Sachs single plate clutch	differs
Hydraulics & hitch
Pump flow declared	28.8 gpm · 109.0 L/min	19.3 gpm · 73.2 L/min	+49% SX 1350
Pressure declared	3,046 psi · 210 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	15,432 lb · 7,000 kg	15,576 lb · 7,065 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,771 lb · 6,700 kg	11,111 lb · 5,040 kg	+33% SX 1350
Maximum permissible mass declared	23,149 lb · 10,500 kg	19,842 lb · 9,000 kg	+17% SX 1350
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% SX 1350
Length declared	170.1 in · 4,320 mm	190.7 in · 4,844 mm	+12% 8400
Width declared	96.5 in · 2,450 mm	90.5 in · 2,298 mm	+7% SX 1350
Height declared	113.4 in · 2,880 mm	109.8 in · 2,790 mm	—
Ground clearance declared	20.5 in · 520 mm	20.1 in · 510 mm	—
Fuel tank declared	243.0–401.5 qt · 230.0–380.0 L	174.4 qt · 165.0 L	differs

Source

Source