Hürlimann SX 1200 vs John Deere 7400 (A)

10 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the SX 1200 and the 7400 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann SX 1200 and John Deere 7400 (A), field by field
Field	SX 1200	7400 (A)	Gap
Engine
Engine power, claimed claimed	118.4 hp	118.4 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.6 WT-3 V	John Deere 6.068 TRW-02	differs
Displacement declared	6.00 L	6.79 L	+13% 7400 (A)
Maximum torque declared	332 lb·ft · 450 N·m	350 lb·ft · 474 N·m	+5% 7400 (A)
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Hydraulically operated wet SAME-DEUTZ-FAHR multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	25.9 gpm · 98.0 L/min	—
Pressure declared	2,176 psi · 150 bar	2,538 psi · 175 bar	+17% 7400 (A)
Three-point lift at ends declared	15,432 lb · 7,000 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,448 lb · 6,100 kg	12,663 lb · 5,744 kg	+6% SX 1200
Maximum permissible mass declared	23,149 lb · 10,500 kg	19,842 lb · 9,000 kg	+17% SX 1200
Wheelbase declared	108.3 in · 2,750 mm	103.3 in · 2,625 mm	—
Length declared	170.1 in · 4,320 mm	174.6 in · 4,435 mm	—
Width declared	96.5 in · 2,450 mm	110.6 in · 2,808 mm	+15% 7400 (A)
Height declared	113.4 in · 2,880 mm	113.4 in · 2,880 mm	—
Ground clearance declared	20.5 in · 520 mm	14.2 in · 360 mm	+44% SX 1200
Fuel tank declared	243.0–401.5 qt · 230.0–380.0 L	215.6 qt · 204.0 L	differs

Source

Source