Hürlimann Prince 335 DT or SAME 35 DT?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Prince 335 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 35 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The SAME 35 DT suits loader and hydraulic implement work better on this data: 275% (22.0 L/min / 5.8 gpm) more hydraulic flow.
- The Hürlimann Prince 335 DT suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Prince 335 DT | 35 DT | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 25.8 kW (34.6 hp)Traktorenlexikon, “Hürlimann Prince 335” | 25.7 kW (34.5 hp)Traktorenlexikon, “SAME Solaris 35” | Not comparableNot comparable on power at the PTO shaft: the Prince 335 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 35 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Prince 335 DT and the 35 DT. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Prince 335 DT and the 35 DT. |
| Which pumps more oil for implements? | 8.0 L/min (2.1 gpm)Traktorenlexikon, “Hürlimann Prince 335” | 30.0 L/min (7.9 gpm)Traktorenlexikon, “SAME Solaris 35” | AheadThe SAME 35 DT has 275% more hydraulic flow (22.0 L/min / 5.8 gpm) than the Hürlimann Prince 335 DT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 943 kg (2,079 lb)Traktorenlexikon, “Hürlimann Prince 335” | 1,200 kg (2,646 lb)Traktorenlexikon, “SAME Solaris 35” | Not comparableNot comparable on three-point lift: the Prince 335 DT: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann Prince 335”); the 35 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Solaris 35”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 1,110 kg (2,447 lb)Traktorenlexikon, “Hürlimann Prince 335” | 1,140 kg (2,513 lb)Traktorenlexikon, “SAME Solaris 35” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 2,400 kg (5,291 lb)Traktorenlexikon, “SAME Solaris 35” | No figureNo call on maximum permissible mass: no figure on record for the Prince 335 DT. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Hürlimann Prince 335” | 12Traktorenlexikon, “SAME Solaris 35” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Prince 335 DT and the 35 DT. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann Prince 335” | 25 km/h (15.5 mph)Traktorenlexikon, “SAME Solaris 35” | AheadThe Hürlimann Prince 335 DT has 20% more top speed (5.0 km/h / 3.1 mph) than the SAME 35 DT (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Hürlimann Prince 335” | 540/1000 rpmTraktorenlexikon, “SAME Solaris 35” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “SAME Solaris 35” | No figureNo call on PTO independence: not stated for the Prince 335 DT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann Prince 335” | 4WDTraktorenlexikon, “SAME Solaris 35” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–1999 | 1992–2003 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The SAME 35 DT has 275% more hydraulic flow (22.0 L/min / 5.8 gpm) than the Hürlimann Prince 335 DT (both pump flow, as stated by the source).
- The Hürlimann Prince 335 DT has 20% more top speed (5.0 km/h / 3.1 mph) than the SAME 35 DT (both top speed forward, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Prince 335 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 35 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Prince 335 DT: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann Prince 335”); the 35 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Solaris 35”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources