Hürlimann H-6136 (A) vs VALMET 8200

10 material differences · fewer than 12

Tractor one

1984–1989

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the H-6136 (A) and the 8200 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Hürlimann H-6136 (A) and VALMET 8200, field by field
Field	H-6136 (A)	8200	Gap
Engine
Engine power, claimed claimed	128.2 hp	128.2 hp	—
Engine declared	HÜRLIMANN H-1106/13	VALMET 634 D	differs
Displacement declared	6.84 L	7.37 L	+8% 8200
Maximum torque declared	354 lb·ft · 480 N·m	361 lb·ft · 490 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Pedal-operated, dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	17.8 gpm · 67.4 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	12,125 lb · 5,500 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,574 lb · 5,250 kg	10,362 lb · 4,700 kg	+12% H-6136 (A)
Maximum permissible mass declared	17,857 lb · 8,100 kg	16,535 lb · 7,500 kg	+8% H-6136 (A)
Wheelbase declared	112.4 in · 2,856 mm	100.7 in · 2,558 mm	+12% H-6136 (A)
Length declared	177.9 in · 4,519 mm	186.8 in · 4,745 mm	—
Width declared	86.6 in · 2,200 mm	86.6 in · 2,200 mm	—
Height declared	108.1 in · 2,745 mm	108.7 in · 2,760 mm	—
Ground clearance declared	19.7 in · 500 mm	18.7 in · 475 mm	+5% H-6136 (A)
Turning radius, braked declared	11.5 ft · 3.52 m	15.5 ft · 4.71 m	+34% 8200
Fuel tank declared	243.0 qt · 230.0 L	174.4 qt · 165.0 L	+39% H-6136 (A)

Source

Source