Hürlimann H-6200 Turbo or Steyr 9200 a?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the H-6200 Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9200 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Steyr 9200 a suits loader and hydraulic implement work better on this data: 69% (45.1 L/min / 11.9 gpm) more hydraulic flow.
  • The Steyr 9200 a suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-6200 Turbo and Steyr 9200 a, with the call on each
QuestionH-6200 Turbo9200 aCall
Which puts more power through the PTO shaft?147.2 kW (197.4 hp)Traktorenlexikon, “Hürlimann H 6200 A”147.2 kW (197.4 hp)Traktorenlexikon, “Steyr 9200”Not comparableNot comparable on power at the PTO shaft: the H-6200 Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9200 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the H-6200 Turbo and the 9200 a.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the H-6200 Turbo and the 9200 a.
Which pumps more oil for implements?65.0 L/min (17.2 gpm)Traktorenlexikon, “Hürlimann H 6200 A”110.1 L/min (29.1 gpm)Traktorenlexikon, “Steyr 9200”AheadThe Steyr 9200 a has 69% more hydraulic flow (45.1 L/min / 11.9 gpm) than the Hürlimann H-6200 Turbo (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,000 kg (13,228 lb)Traktorenlexikon, “Hürlimann H 6200 A”8,580 kg (18,916 lb)Traktorenlexikon, “Steyr 9200”Not comparableNot comparable on three-point lift: the H-6200 Turbo: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 6200 A”); the 9200 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9200”) — not the same quantity, basis and condition.
Which is heavier, for traction?8,500 kg (18,739 lb)Traktorenlexikon, “Hürlimann H 6200 A”6,300 kg (13,889 lb)Traktorenlexikon, “Steyr 9200”Ahead (a fact, not an advantage)The Hürlimann H-6200 Turbo is 35% heavier (2,200 kg / 4,850 lb) than the Steyr 9200 a (both unladen weight, as stated by the source).
Which may carry more ballast and load?11,500 kg (25,353 lb)Traktorenlexikon, “Hürlimann H 6200 A”11,000 kg (24,251 lb)Traktorenlexikon, “Steyr 9200”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?36Traktorenlexikon, “Hürlimann H 6200 A”32Traktorenlexikon, “Steyr 9200”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the H-6200 Turbo and the 9200 a.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann H 6200 A”40 km/h (24.9 mph)Traktorenlexikon, “Steyr 9200”AheadThe Steyr 9200 a has 33% more top speed (10.0 km/h / 6.2 mph) than the Hürlimann H-6200 Turbo (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann H 6200 A”540/1000 rpmTraktorenlexikon, “Steyr 9200”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the H-6200 Turbo and the 9200 a.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann H 6200 A”4WDTraktorenlexikon, “Steyr 9200”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?19821995–1997Ahead (a fact, not an advantage)The Steyr 9200 a is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 9200 a has 69% more hydraulic flow (45.1 L/min / 11.9 gpm) than the Hürlimann H-6200 Turbo (both pump flow, as stated by the source).
  • The Hürlimann H-6200 Turbo is 35% heavier (2,200 kg / 4,850 lb) than the Steyr 9200 a (both unladen weight, as stated by the source).
  • The Steyr 9200 a has 33% more top speed (10.0 km/h / 6.2 mph) than the Hürlimann H-6200 Turbo (both top speed forward, as stated by the source).
  • The Steyr 9200 a is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the H-6200 Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9200 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the H-6200 Turbo: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 6200 A”); the 9200 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9200”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources