Hürlimann H-6200 Turbo vs Steyr 9200 a
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the H-6200 Turbo and the 9200 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | H-6200 Turbo | 9200 a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 197.4 hp | 197.4 hp | — |
| Engine declared | Hürlimann H-115/6 Turbo | Steyr-VALMET WD 634 DS | differs |
| Displacement declared | 7.48 L | 7.37 L | — |
| Maximum torque declared | — | 612 lb·ft · 830 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% 9200 a |
| Hydraulics & hitch | |||
| Pump flow declared | 17.2 gpm · 65.0 L/min | 29.1 gpm · 110.1 L/min | +69% 9200 a |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Three-point lift at ends declared | 13,228 lb · 6,000 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,739 lb · 8,500 kg | 13,889 lb · 6,300 kg | +35% H-6200 Turbo |
| Maximum permissible mass declared | 25,353 lb · 11,500 kg | 24,251 lb · 11,000 kg | — |
| Wheelbase declared | 120.3 in · 3,055 mm | 115.2 in · 2,925 mm | — |
| Length declared | 195.7 in · 4,970 mm | 203.3 in · 5,165 mm | — |
| Width declared | 94.5 in · 2,400 mm | 96.5 in · 2,450 mm | — |
| Height declared | 120.9 in · 3,070 mm | 121.3 in · 3,080 mm | — |
| Ground clearance declared | — | 19.7 in · 500 mm | — |
| Fuel tank declared | 243.0 qt · 230.0 L | 348.7 qt · 330.0 L | +43% 9200 a |
Hürlimann H-6200 Turbo sources
Source
- Source: Traktorenlexikon, “Hürlimann H 6200 A”
Steyr 9200 a sources
Source
- Source: Traktorenlexikon, “Steyr 9200”
- Source: Traktorenlexikon, “Steyr 9190 a”