Hürlimann H-6190 Master or SAME Super-Titan?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the H-6190 Master has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Super-Titan has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-6190 Master and SAME Super-Titan, with the call on each
QuestionH-6190 MasterSuper-TitanCall
Which puts more power through the PTO shaft?139 kW (186 hp)Traktorenlexikon, “Hürlimann H 6190”139 kW (186 hp)Traktorenlexikon, “SAME Super Titan”Not comparableNot comparable on power at the PTO shaft: the H-6190 Master has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Super-Titan has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the H-6190 Master and the Super-Titan.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the H-6190 Master and the Super-Titan.
Which pumps more oil for implements?60.8 L/min (16.1 gpm)Traktorenlexikon, “Hürlimann H 6190”73.0 L/min (19.3 gpm)Traktorenlexikon, “SAME Super Titan”AheadThe SAME Super-Titan has 20% more hydraulic flow (12.2 L/min / 3.2 gpm) than the Hürlimann H-6190 Master (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?8,600 kg (18,960 lb)Traktorenlexikon, “Hürlimann H 6190”3,200 kg (7,055 lb)Traktorenlexikon, “SAME Super Titan”AheadThe Hürlimann H-6190 Master has 169% more lift (5,400 kg / 11,905 lb) than the SAME Super-Titan (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,000 kg (13,228 lb)Traktorenlexikon, “Hürlimann H 6190”6,450 kg (14,220 lb)Traktorenlexikon, “SAME Super Titan”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?10,000 kg (22,046 lb)Traktorenlexikon, “Hürlimann H 6190”10,000 kg (22,046 lb)Traktorenlexikon, “SAME Super Titan”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?27Traktorenlexikon, “Hürlimann H 6190”27Traktorenlexikon, “SAME Super Titan”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the H-6190 Master and the Super-Titan.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann H 6190”40 km/h (24.9 mph)Traktorenlexikon, “SAME Super Titan”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann H 6190”540/1000 rpmTraktorenlexikon, “SAME Super Titan”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the H-6190 Master and the Super-Titan.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann H 6190”4WDTraktorenlexikon, “SAME Super Titan”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–20011998–2001Ahead (a fact, not an advantage)The SAME Super-Titan is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME Super-Titan has 20% more hydraulic flow (12.2 L/min / 3.2 gpm) than the Hürlimann H-6190 Master (both pump flow, as stated by the source).
  • The Hürlimann H-6190 Master has 169% more lift (5,400 kg / 11,905 lb) than the SAME Super-Titan (both lift at the hitch ends, as stated by the source).
  • The SAME Super-Titan is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the H-6190 Master has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Super-Titan has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources