Hürlimann H-6190 Master vs Massey Ferguson MF 3690 (A)

11 material differences · fewer than 12

Tractor one

1992–2001

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the H-6190 Master and the MF 3690 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-6190 Master and Massey Ferguson MF 3690 (A), field by field
Field	H-6190 Master	MF 3690 (A)	Gap
Engine
Engine power, claimed claimed	186 hp	187.5 hp	—
Engine declared	SAME-LAMBORGHINI-HÜRLIMANN 1000.6 WTIR	VALMET 612 DS or 634 DS	differs
Displacement declared	6.00 L	7.37 L	+23% MF 3690 (A)
Maximum torque declared	500 lb·ft · 678 N·m	538–556 lb·ft · 730–754 N·m	differs
Transmission
Top speed declared	24.9 mph · 40 km/h	15.5–17.4 mph · 25–28 km/h	differs
Clutch declared	Pedal-operated electrohydraulic wet multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	16.1 gpm · 60.8 L/min	—	—
Pressure declared	2,176 psi · 150 bar	2,350 psi · 162 bar	+8% MF 3690 (A)
Three-point lift at ends declared	18,960 lb · 8,600 kg	11,949 lb · 5,420 kg	+59% H-6190 Master
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,228 lb · 6,000 kg	14,815 lb · 6,720 kg	+12% MF 3690 (A)
Maximum permissible mass declared	22,046 lb · 10,000 kg	19,842 lb · 9,000 kg	+11% H-6190 Master
Wheelbase declared	112.2 in · 2,850 mm	115.7 in · 2,940 mm	—
Length declared	188.2 in · 4,780 mm	203.3 in · 5,165 mm	+8% MF 3690 (A)
Width declared	97.2 in · 2,470 mm	94.1 in · 2,391 mm	—
Height declared	115.4 in · 2,930 mm	114.4 in · 2,905 mm	—
Ground clearance declared	21.7 in · 550 mm	17.0 in · 433 mm	+27% H-6190 Master
Turning radius, braked declared	12.8 ft · 3.90 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	274.7–338.1 qt · 260.0–320.0 L	differs

Source

Source