Hürlimann H-6165 Master or SAME Galaxy 170 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the H-6165 Master has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Galaxy 170 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SAME Galaxy 170 DT suits loader and hydraulic implement work better on this data: 11% (6.5 L/min / 1.7 gpm) more hydraulic flow.
  • The Hürlimann H-6165 Master suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-6165 Master and SAME Galaxy 170 DT, with the call on each
QuestionH-6165 MasterGalaxy 170 DTCall
Which puts more power through the PTO shaft?120.6 kW (161.7 hp)Traktorenlexikon, “Hürlimann H 6165”121.4 kW (162.8 hp)Traktorenlexikon, “SAME Galaxy 170”Not comparableNot comparable on power at the PTO shaft: the H-6165 Master has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Galaxy 170 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the H-6165 Master and the Galaxy 170 DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the H-6165 Master and the Galaxy 170 DT.
Which pumps more oil for implements?57.5 L/min (15.2 gpm)Traktorenlexikon, “Hürlimann H 6165”64.0 L/min (16.9 gpm)Traktorenlexikon, “SAME Galaxy 170”AheadThe SAME Galaxy 170 DT has 11% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Hürlimann H-6165 Master (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?8,600 kg (18,960 lb)Traktorenlexikon, “Hürlimann H 6165”6,000 kg (13,228 lb)Traktorenlexikon, “SAME Galaxy 170”Not comparableNot comparable on three-point lift: the H-6165 Master: lift at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann H 6165”); the Galaxy 170 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Galaxy 170”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,830 kg (12,853 lb)Traktorenlexikon, “Hürlimann H 6165”6,180 kg (13,625 lb)Traktorenlexikon, “SAME Galaxy 170”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “Hürlimann H 6165”No figureNo call on maximum permissible mass: no figure on record for the Galaxy 170 DT.
Which has the wider choice of gears?27Traktorenlexikon, “Hürlimann H 6165”24 to 27Traktorenlexikon, “SAME Galaxy 170”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the H-6165 Master and the Galaxy 170 DT.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann H 6165”30 km/h (18.6 mph)Traktorenlexikon, “SAME Galaxy 170”AheadThe Hürlimann H-6165 Master has 33% more top speed (10.0 km/h / 6.2 mph) than the SAME Galaxy 170 DT (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann H 6165”1000 rpmTraktorenlexikon, “SAME Galaxy 170”AheadThe Hürlimann H-6165 Master offers 540 rpm at the PTO, which the SAME Galaxy 170 DT does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Hürlimann H 6165”No figureNo call on PTO independence: not stated for the Galaxy 170 DT.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann H 6165”4WDTraktorenlexikon, “SAME Galaxy 170”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–20011983–1994Ahead (a fact, not an advantage)The Hürlimann H-6165 Master is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME Galaxy 170 DT has 11% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Hürlimann H-6165 Master (both pump flow, as stated by the source).
  • The Hürlimann H-6165 Master has 33% more top speed (10.0 km/h / 6.2 mph) than the SAME Galaxy 170 DT (both top speed forward, as stated by the source).
  • The Hürlimann H-6165 Master offers 540 rpm at the PTO, which the SAME Galaxy 170 DT does not (as stated by the sources).
  • The Hürlimann H-6165 Master is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the H-6165 Master has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Galaxy 170 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the H-6165 Master: lift at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann H 6165”); the Galaxy 170 DT: lift at the hitch ends, as stated by the source (Traktorenlexikon, “SAME Galaxy 170”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources