Hürlimann H-6160 A vs International Harvester 1086

8 material differences · fewer than 12

Tractor one

1979–1983

No measured PTO figure

Tractor two

1976–1979

No measured PTO figure

Which should you choose?

Read our verdict on the H-6160 A and the 1086 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-6160 A and International Harvester 1086, field by field
Field	H-6160 A	1086	Gap
Engine
Engine power, claimed claimed	155.7 hp	131.2 hp	+19% H-6160 A
Engine declared	Hürlimann H-1106/15-Turbo	INTERNATIONAL HARVESTER DT-414	differs
Displacement declared	6.84 L	6.78 L	—
Maximum torque declared	471 lb·ft · 638 N·m	391 lb·ft · 530 N·m	+20% H-6160 A
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 1086
Hydraulics & hitch
Pump flow declared	15.3 gpm · 58.0 L/min	12.0 gpm · 45.4 L/min	+28% H-6160 A
Pressure declared	2,277 psi · 157 bar	—	—
Three-point lift at ends declared	—	7,352 lb · 3,335 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,220 lb · 6,450 kg	12,725 lb · 5,772 kg	+12% H-6160 A
Maximum permissible mass declared	20,503 lb · 9,300 kg	—	—
Wheelbase declared	112.5 in · 2,857 mm	104.8 in · 2,662 mm	+7% H-6160 A
Length declared	175.2 in · 4,450 mm	168.0 in · 4,267 mm	—
Width declared	92.5 in · 2,350 mm	102.0 in · 2,591 mm	+10% 1086
Height declared	115.0 in · 2,920 mm	115.0 in · 2,921 mm	—
Ground clearance declared	19.3 in · 490 mm	13.0 in · 330 mm	+48% H-6160 A
Turning radius, braked declared	—	11.6 ft · 3.53 m	—
Fuel tank declared	253.6 qt · 240.0 L	252.0 qt · 238.5 L	—

Source

Source