Hürlimann H-6135 Elite vs Massey Ferguson MF 6480 A

8 material differences · fewer than 12

Tractor one

1991–1996

No measured PTO figure

Tractor two

2003–2012

No measured PTO figure

Which should you choose?

Read our verdict on the H-6135 Elite and the MF 6480 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-6135 Elite and Massey Ferguson MF 6480 A, field by field
Field	H-6135 Elite	MF 6480 A	Gap
Engine
Engine power, claimed claimed	130 hp	143.1 hp	+10% MF 6480 A
Engine declared	Hürlimann H-1000.6 WT	Perkins 1106 C-60 TA	differs
Displacement declared	6.00 L	—	—
Maximum torque declared	361 lb·ft · 490 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal-operated dry SLH single-disc clutch	Driving clutch with 5 x 230 mm disc diameter	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	15.2 gpm · 57.5 L/min	27.2 gpm · 103.0 L/min	+79% MF 6480 A
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	3,902 lb · 1,770 kg	—	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	—	—
Weight & dimensions
Unladen weight declared	11,993 lb · 5,440 kg	11,552 lb · 5,240 kg	—
Maximum permissible mass declared	—	20,393 lb · 9,250 kg	—
Wheelbase declared	108.3 in · 2,750 mm	112.1 in · 2,848 mm	—
Length declared	202.4 in · 5,140 mm	183.3 in · 4,656 mm	+10% H-6135 Elite
Width declared	88.6 in · 2,250 mm	79.3 in · 2,014 mm	+12% H-6135 Elite
Height declared	113.8 in · 2,890 mm	115.6 in · 2,935 mm	—
Ground clearance declared	20.5 in · 520 mm	14.9 in · 379 mm	+37% H-6135 Elite
Turning radius, braked declared	17.8 ft · 5.42 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	285.3 qt · 270.0 L	+17% MF 6480 A

Source

Source