10 material differences · fewer than 12
Tractor oneHürlimann H-6130 A1979–1982No measured PTO figureTractor twoInternational Harvester Farmall 12061965–1967No measured PTO figure
Which should you choose?
Read our verdict on the H-6130 A and the Farmall 1206 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | H-6130 A | Farmall 1206 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 128.2 hp | 112.4 hp | +14% H-6130 A |
| Engine declared | Hürlimann H-1106/12 | INTERNATIONAL HARVESTER DT-361 | differs |
| Displacement declared | 6.84 L | 5.91 L | +16% H-6130 A |
| Maximum torque declared | 358 lb·ft · 485 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% Farmall 1206 |
| Hydraulics & hitch | |||
| Pump flow declared | 10.3 gpm · 39.0 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,677 lb · 5,750 kg | 10,115 lb · 4,588 kg | +25% H-6130 A |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | — | — |
| Wheelbase declared | 112.5 in · 2,857 mm | 104.8 in · 2,662 mm | +7% H-6130 A |
| Length declared | 182.7 in · 4,640 mm | 153.0 in · 3,886 mm | +19% H-6130 A |
| Width declared | 87.8–111.4 in · 2,230–2,830 mm | 94.0 in · 2,388 mm | differs |
| Ground clearance declared | 17.3 in · 440 mm | 23.5 in · 597 mm | +36% Farmall 1206 |
| Turning radius, braked declared | — | 10.9 ft · 3.33 m | — |
| Fuel tank declared | 243.0 qt · 230.0 L | 140.0 qt · 132.5 L | +74% H-6130 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-6130 A sources
- Source: Traktorenlexikon, “Hürlimann H 6130”
International Harvester Farmall 1206 sources
- Source: Traktorenlexikon, “Farmall Farmall 1206”
- Source: Traktorenlexikon, “IHC 1206”