Hürlimann H-5110 (A) vs John Deere 4040 (A)

7 material differences · fewer than 12

Tractor one

1979–1983

No measured PTO figure

Tractor two

1977–1985

No measured PTO figure

Which should you choose?

Read our verdict on the H-5110 (A) and the 4040 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Hürlimann H-5110 (A) and John Deere 4040 (A), field by field
Field	H-5110 (A)	4040 (A)	Gap
Engine
Engine power, claimed claimed	108.5 hp	109 hp	—
Engine declared	Hürlimann H-1105/10 or H-1105/10-Turbo	John Deere 6.359 TL	differs
Displacement declared	5.70 L	5.88 L	—
Maximum torque declared	292 lb·ft · 396 N·m	299 lb·ft · 405 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated dry SAME single-disc clutch	Pedal-operated hydraulic and oil-cooled double-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	—	25.4 gpm · 96.0 L/min	—
Pressure declared	—	3,481 psi · 240 bar	—
Three-point lift at ends declared	8,543 lb · 3,875 kg	9,039 lb · 4,100 kg	+6% 4040 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,480–10,582 lb · 4,300–4,800 kg	11,171 lb · 5,067 kg	differs
Maximum permissible mass declared	16,094 lb · 7,300 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	102.6–103.9 in · 2,607–2,640 mm	104.0 in · 2,642 mm	—
Length declared	172.4 in · 4,380 mm	176.5 in · 4,483 mm	—
Width declared	81.5 in · 2,070 mm	78.3 in · 1,990 mm	—
Height declared	112.2 in · 2,850 mm	112.6 in · 2,861 mm	—
Ground clearance declared	17.7 in · 450 mm	20.3 in · 515 mm	+14% 4040 (A)
Fuel tank declared	169.1 qt · 160.0 L	147.9 qt · 140.0 L	+14% H-5110 (A)

Source

Source