Hürlimann H-488 T "Prestige" vs VALMET 6350 HiTech

11 material differences · fewer than 12

Tractor one

1989–1998

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the H-488 T "Prestige" and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Hürlimann H-488 T "Prestige" and VALMET 6350 HiTech, field by field
Field	H-488 T "Prestige"	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	Hürlimann H-1000.4 WT	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	4.00 L	4.40 L	+10% 6350 HiTech
Maximum torque declared	225 lb·ft · 305 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Hydraulics & hitch
Pump flow declared	—	18.5 gpm · 70.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	6,349 lb · 2,880 kg	12,346 lb · 5,600 kg	+94% 6350 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,485 lb · 3,395 kg	10,516 lb · 4,770 kg	+41% 6350 HiTech
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	91.3 in · 2,320 mm	91.6 in · 2,326 mm	—
Length declared	159.4 in · 4,050 mm	180.5 in · 4,585 mm	+13% 6350 HiTech
Width declared	79.5 in · 2,020 mm	92.3 in · 2,345 mm	+16% 6350 HiTech
Height declared	102.4 in · 2,600 mm	110.2 in · 2,800 mm	+8% 6350 HiTech
Ground clearance declared	16.1 in · 410 mm	17.1 in · 434 mm	+6% 6350 HiTech
Turning radius, braked declared	11.8 ft · 3.60 m	15.3 ft · 4.65 m	+29% 6350 HiTech
Fuel tank declared	116.2 qt · 110.0 L	174.4 qt · 165.0 L	+50% 6350 HiTech

Source

Source