Hürlimann H-480 (A) vs SAME Mercury 85 Export (DT)

9 material differences · fewer than 12

Tractor one

1979–1982

No measured PTO figure

Tractor two

1981–1985

No measured PTO figure

Which should you choose?

Read our verdict on the H-480 (A) and the Mercury 85 Export (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Hürlimann H-480 (A) and SAME Mercury 85 Export (DT), field by field
Field	H-480 (A)	Mercury 85 Export (DT)	Gap
Engine
Engine power, claimed claimed	80.9 hp	82 hp	—
Engine declared	Hürlimann H-1104/7	SAME DA 1054 P	differs
Displacement declared	4.56 L	4.15 L	+10% H-480 (A)
Maximum torque declared	232 lb·ft · 315 N·m	218 lb·ft · 295 N·m	+7% H-480 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Dry SAME double clutch	Dry SAME double clutch	—
Hydraulics & hitch
Pump flow declared	9.2 gpm · 34.8 L/min	10.8 gpm · 41.0 L/min	+18% Mercury 85 Export (DT)
Pressure declared	—	2,973 psi · 205 bar	—
Three-point lift at ends declared	4,233 lb · 1,920 kg	8,157 lb · 3,700 kg	+93% Mercury 85 Export (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,722 lb · 3,049 kg	7,209 lb · 3,270 kg	+7% Mercury 85 Export (DT)
Wheelbase declared	92.1 in · 2,340 mm	91.3 in · 2,320 mm	—
Length declared	156.7 in · 3,980 mm	151.2 in · 3,840 mm	—
Width declared	76.8 in · 1,950 mm	76.0 in · 1,930 mm	—
Height declared	107.1 in · 2,720 mm	109.4 in · 2,780 mm	—
Ground clearance declared	15.7 in · 400 mm	20.9 in · 530 mm	+33% Mercury 85 Export (DT)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	100.4 qt · 95.0 L	126.8 qt · 120.0 L	+26% Mercury 85 Export (DT)

Source

Source