10 material differences · fewer than 12

Tractor oneHürlimann H-480 (A)1979–1982No measured PTO figureTractor twoMassey Ferguson MF 2901979–1987No measured PTO figure

Which should you choose?

Read our verdict on the H-480 (A) and the MF 290 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-480 (A) and Massey Ferguson MF 290, field by field
Field	H-480 (A)	MF 290	Gap
Engine
Engine power, claimed claimed	80.9 hp	74.0 hp	+9% H-480 (A)
Engine declared	Hürlimann H-1104/7	Perkins A 4.248 S	differs
Displacement declared	4.56 L	4.06 L	+12% H-480 (A)
Maximum torque declared	232 lb·ft · 315 N·m	211 lb·ft · 285.6 N·m	+10% H-480 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% MF 290
Clutch declared	Dry SAME double clutch	pedal-operated dry and air-cooled double clutch	differs
Hydraulics & hitch
Pump flow declared	9.2 gpm · 34.8 L/min	4.7 gpm · 17.9 L/min	+94% H-480 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,722 lb · 3,049 kg	6,404 lb · 2,905 kg	—
Wheelbase declared	92.1 in · 2,340 mm	90.0 in · 2,286 mm	—
Length declared	156.7 in · 3,980 mm	153.1 in · 3,890 mm	—
Width declared	76.8–104.3 in · 1,950–2,650 mm	79.5 in · 2,020 mm	differs
Height, over the safety frame declared	107.1 in · 2,720 mm	99.2 in · 2,520 mm	+8% H-480 (A)
Ground clearance declared	15.7 in · 400 mm	15.0 in · 381 mm	—
Turning radius, braked declared	—	12.8 ft · 3.91 m	—
Fuel tank declared	100.4 qt · 95.0 L	95.1 qt · 90 L	+6% H-480 (A)

Source

Source