11 material differences · fewer than 12
Tractor oneHürlimann H-468 "Prestige"1989–1998No measured PTO figureTractor twoInternational Harvester 1055 XL1981–1982No measured PTO figure
Which should you choose?
Read our verdict on the H-468 "Prestige" and the 1055 XL → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | H-468 "Prestige" | 1055 XL | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | Hürlimann H-1000.4 W | IH D-358 | differs |
| Displacement declared | 4.00 L | 5.87 L | +47% 1055 XL |
| Maximum torque declared | 182 lb·ft · 247 N·m | 279 lb·ft · 378 N·m | +53% 1055 XL |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | pedal-operated dry SLH single disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 9.5 gpm · 36.0 L/min | — |
| Pressure declared | 2,611 psi · 180 bar | 2,466 psi · 170 bar | +6% H-468 "Prestige" |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,790 lb · 3,080 kg | 9,634 lb · 4,370 kg | +42% 1055 XL |
| Wheelbase declared | 90.2 in · 2,290 mm | 103.5 in · 2,630 mm | +15% 1055 XL |
| Length declared | 157.1 in · 3,990 mm | 165.1 in · 4,194 mm | — |
| Width declared | 77.6–101.2 in · 1,970–2,570 mm | 90.8 in · 2,306 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 20.2 in · 512 mm | +25% 1055 XL |
| Turning radius, braked declared | 12.3 ft · 3.76 m | 14.4 ft · 4.40 m | +17% 1055 XL |
| Fuel tank declared | 89.8 qt · 85.0 L | 147.9 qt · 140 L | +65% 1055 XL |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-468 "Prestige" sources
- Source: Traktorenlexikon, “Hürlimann H 468 Prestige”
International Harvester 1055 XL sources
- Source: Traktorenlexikon, “IHC 1055 XL”