Hürlimann H-466 (A) or International Harvester 744?
Which should you choose?
On performance, no comparable figure differs by more than its threshold: on this data the machines are level. On features, the Hürlimann H-466 (A) is ahead on forward gears and PTO speeds.
- The Hürlimann H-466 (A) suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | H-466 (A) | 744 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 42.4 kW (56.8 hp)Traktorenlexikon, “Hürlimann H 466” | 42.7 kW (57.3 hp)Traktorenlexikon, “IHC 744” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the H-466 (A) and the 744. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the H-466 (A) and the 744. |
| Which pumps more oil for implements? | — | 27.2 L/min (7.2 gpm)Traktorenlexikon, “IHC 744” | No figureNo call on hydraulic flow: no figure on record for the H-466 (A). |
| Which lifts more on the three-point hitch? | 2,294 kg (5,058 lb)Traktorenlexikon, “Hürlimann H 466” | 2,900 kg (6,393 lb)Traktorenlexikon, “IHC 744” | Not comparableNot comparable on three-point lift: the H-466 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 466”); the 744: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IHC 744”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,840 kg (6,261 lb)Traktorenlexikon, “Hürlimann H 466” | 3,080 kg (6,790 lb)Traktorenlexikon, “IHC 744” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 5,650 kg (12,456 lb)Traktorenlexikon, “IHC 744” | No figureNo call on maximum permissible mass: no figure on record for the H-466 (A). |
| Which has the wider choice of gears? | 15 to 24Traktorenlexikon, “Hürlimann H 466” | 8Traktorenlexikon, “IHC 744” | AheadThe Hürlimann H-466 (A) has 88% more forward gears (7 gears) than the International Harvester 744 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the H-466 (A) and the 744. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann H 466” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “IHC 744” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Hürlimann H 466” | 540 rpmTraktorenlexikon, “IHC 744” | AheadThe Hürlimann H-466 (A) offers 1000 rpm at the PTO, which the International Harvester 744 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “IHC 744” | No figureNo call on PTO independence: not stated for the H-466 (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Hürlimann H 466” | Two-wheel or four-wheel driveTraktorenlexikon, “IHC 744” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1983–1986 | 1974–1980 | Ahead (a fact, not an advantage)The Hürlimann H-466 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hürlimann H-466 (A) has 88% more forward gears (7 gears) than the International Harvester 744 (both forward gears, as stated by the source).
- The Hürlimann H-466 (A) offers 1000 rpm at the PTO, which the International Harvester 744 does not (as stated by the sources).
- The Hürlimann H-466 (A) is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the H-466 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Hürlimann H 466”); the 744: lift at the hitch ends, as stated by the source (Traktorenlexikon, “IHC 744”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources