Hürlimann H-4105 Elite (Traktorenlexikon) or Landini 105 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the H-4105 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 105 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Landini 105 DT suits loader and hydraulic implement work better on this data: 46% (19.5 L/min / 5.2 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-4105 Elite (Traktorenlexikon) and Landini 105 DT, with the call on each
QuestionH-4105 Elite105 DTCall
Which puts more power through the PTO shaft?75.7 kW (101.5 hp)Traktorenlexikon, “Hürlimann 4105 Elite”75.8 kW (101.6 hp)Traktorenlexikon, “Landini Legend 105”Not comparableNot comparable on power at the PTO shaft: the H-4105 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 105 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the H-4105 Elite and the 105 DT.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the H-4105 Elite and the 105 DT.
Which pumps more oil for implements?42.0 L/min (11.1 gpm)Traktorenlexikon, “Hürlimann 4105 Elite”61.5 L/min (16.2 gpm)Traktorenlexikon, “Landini Legend 105”AheadThe Landini 105 DT has 46% more hydraulic flow (19.5 L/min / 5.2 gpm) than the Hürlimann H-4105 Elite (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,500 kg (14,330 lb)Traktorenlexikon, “Landini Legend 105”No figureNo call on three-point lift: no figure on record for the H-4105 Elite.
Which is heavier, for traction?3,920 kg (8,642 lb)Traktorenlexikon, “Hürlimann 4105 Elite”5,410 kg (11,927 lb)Traktorenlexikon, “Landini Legend 105”Ahead (a fact, not an advantage)The Landini 105 DT is 38% heavier (1,490 kg / 3,285 lb) than the Hürlimann H-4105 Elite (both unladen weight, as stated by the source).
Which may carry more ballast and load?10,400 kg (22,928 lb)Traktorenlexikon, “Landini Legend 105”No figureNo call on maximum permissible mass: no figure on record for the H-4105 Elite.
Which has the wider choice of gears?30 to 40Traktorenlexikon, “Hürlimann 4105 Elite”36Traktorenlexikon, “Landini Legend 105”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the H-4105 Elite and the 105 DT.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann 4105 Elite”40 km/h (24.9 mph)Traktorenlexikon, “Landini Legend 105”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann 4105 Elite”540/1000 rpmTraktorenlexikon, “Landini Legend 105”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Landini Legend 105”No figureNo call on PTO independence: not stated for the H-4105 Elite.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann 4105 Elite”4WDTraktorenlexikon, “Landini Legend 105”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1989–19951997–2001Ahead (a fact, not an advantage)The Landini 105 DT is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Landini 105 DT has 46% more hydraulic flow (19.5 L/min / 5.2 gpm) than the Hürlimann H-4105 Elite (both pump flow, as stated by the source).
  • The Landini 105 DT is 38% heavier (1,490 kg / 3,285 lb) than the Hürlimann H-4105 Elite (both unladen weight, as stated by the source).
  • The Landini 105 DT is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the H-4105 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 105 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources