Hürlimann H-362 (A) vs Lamborghini 600 DT

5 material differences · fewer than 12

Tractor one

1989–1996

No measured PTO figure

Tractor two

1989–1996

No measured PTO figure

Which should you choose?

Read our verdict on the H-362 (A) and the 600 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 11 fields identical or within 5%, which is not counted as material

Hürlimann H-362 (A) and Lamborghini 600 DT, field by field
Field	H-362 (A)	600 DT	Gap
Engine
Engine declared	Hürlimann H-1000.3 A	SAME 1000.3 A	differs
Displacement declared	3.00 L	3.00 L	—
Maximum torque declared	138 lb·ft · 187 N·m	138 lb·ft · 187 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry SLH double clutch	Dry SLH double clutch	—
Hydraulics & hitch
Pump flow declared	—	7.7 gpm · 29.0 L/min	—
Pressure declared	1,305 psi · 90 bar	1,305 psi · 90 bar	—
Three-point lift at ends declared	4,784 lb · 2,170 kg	4,788 lb · 2,172 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,688 lb · 2,580 kg	5,401 lb · 2,450 kg	+5% H-362 (A)
Maximum permissible mass declared	10,141 lb · 4,600 kg	9,259 lb · 4,200 kg	+10% H-362 (A)
Wheelbase declared	83.5 in · 2,120 mm	81.3 in · 2,065 mm	—
Length declared	148.2 in · 3,765 mm	127.0 in · 3,225 mm	+17% H-362 (A)
Width declared	70.5 in · 1,790 mm	69.9 in · 1,775 mm	—
Height declared	92.9 in · 2,360 mm	93.5 in · 2,375 mm	—
Ground clearance declared	—	14.6 in · 370 mm	—
Turning radius, braked declared	10.6 ft · 3.24 m	9.0 ft · 2.75 m	+18% H-362 (A)
Fuel tank declared	82.4 qt · 78.0 L	82.4 qt · 78.0 L	—

Source

Source