9 material differences · fewer than 12

Tractor oneHürlimann H-358 "Prestige"1989–1998No measured PTO figureTractor twoSAME Explorer 60 II (DT)1989–1998No measured PTO figure

Which should you choose?

Read our verdict on the H-358 "Prestige" and the Explorer 60 II (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Hürlimann H-358 "Prestige" and SAME Explorer 60 II (DT), field by field
Field	H-358 "Prestige"	Explorer 60 II (DT)	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.1 hp	—
Engine declared	Hürlimann H-1000.3 W	SAME 1000.3 A	differs
Displacement declared	3.00 L	3.00 L	—
Maximum torque declared	149 lb·ft · 202 N·m	151 lb·ft · 205 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SLH single-plate clutch	Pedal-operated dry SAME single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	7.5 gpm · 28.5 L/min	7.5 gpm · 28.5 L/min	—
Pressure declared	3,046 psi · 210 bar	1,740 psi · 120 bar	+75% H-358 "Prestige"
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,118 lb · 2,775 kg	5,600 lb · 2,540 kg	+9% H-358 "Prestige"
Wheelbase declared	83.9 in · 2,130 mm	86.4 in · 2,195 mm	—
Length declared	148.0 in · 3,760 mm	135.4 in · 3,440 mm	+9% H-358 "Prestige"
Width declared	70.5–93.7 in · 1,790–2,380 mm	70.1–93.7 in · 1,780–2,380 mm	—
Height, over the cab declared	100.0 in · 2,540 mm	92.5 in · 2,350 mm	+8% H-358 "Prestige"
Ground clearance declared	15.4 in · 390 mm	17.1 in · 435 mm	+12% Explorer 60 II (DT)
Turning radius, braked declared	—	9.1 ft · 2.78 m	—
Fuel tank declared	74.0 qt · 70.0 L	70.8 qt · 67.0 L	—

Source

Source