8 material differences · fewer than 12
Tractor oneHürlimann H-345 (A)1982–1986No measured PTO figureTractor twoUZINA TRACTORUL R-450 (DT)1974–1981No measured PTO figure
Which should you choose?
Read our verdict on the H-345 (A) and the R-450 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | H-345 (A) | R-450 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 45.3 hp | — |
| Engine declared | SAME 983-L | UTB D-115 | differs |
| Displacement declared | 2.72 L | 2.34 L | +16% H-345 (A) |
| Maximum torque declared | — | 105 lb·ft · 143 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Dry double clutch | dry UTB double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.0 gpm · 34.0 L/min | 5.8 gpm · 21.8 L/min | +56% H-345 (A) |
| Pressure declared | — | 2,973 psi · 205 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,453 lb · 2,020 kg | 3,968 lb · 1,800 kg | +12% H-345 (A) |
| Wheelbase declared | 76.6 in · 1,945 mm | 72.6 in · 1,845 mm | +5% H-345 (A) |
| Length declared | 126.0 in · 3,200 mm | 123.6 in · 3,140 mm | — |
| Width declared | 67.7 in · 1,720 mm | 65.6–87.6 in · 1,666–2,225 mm | differs |
| Ground clearance declared | 18.7 in · 475 mm | 18.3 in · 465 mm | — |
| Turning radius, braked declared | — | 10.6 ft · 3.22 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 57.1 qt · 54.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-345 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 345 (A)”
- Source: Traktorenlexikon, “Lamborghini 483 DT”
UZINA TRACTORUL R-450 (DT) sources
- Source: Traktorenlexikon, “UTB 450 (DT)”
- Source: Traktorenlexikon, “UTB U 445”