Hürlimann H-345 (A) vs John Deere 930

9 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1974–1977

No measured PTO figure

Which should you choose?

Read our verdict on the H-345 (A) and the 930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-345 (A) and John Deere 930, field by field
Field	H-345 (A)	930	Gap
Engine
Engine power, claimed claimed	47.3 hp	40.5 hp	+17% H-345 (A)
Engine declared	SAME 983-L	John Deere 3.164 DL 15	differs
Displacement declared	2.72 L	2.70 L	—
Maximum torque declared	—	107 lb·ft · 145 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	16.8–18.6 mph · 27–30 km/h	differs
Clutch declared	Dry double clutch	Pedal operated, two-stage dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	9.0 gpm · 34.0 L/min	6.7 gpm · 25.4 L/min	+34% H-345 (A)
Pressure declared	—	3,481–4,496 psi · 240–310 bar	—
Three-point lift at ends declared	3,889 lb · 1,764 kg	3,490 lb · 1,583 kg	+11% H-345 (A)
Rear PTO speeds declared	540 rpm	—	—
Weight & dimensions
Unladen weight declared	4,453 lb · 2,020 kg	4,817 lb · 2,185 kg	+8% 930
Maximum permissible mass declared	—	7,055 lb · 3,200 kg	—
Wheelbase declared	76.6 in · 1,945 mm	74.4 in · 1,890 mm	—
Length declared	126.0 in · 3,200 mm	136.2 in · 3,460 mm	+8% 930
Width declared	67.7 in · 1,720 mm	66.5 in · 1,690 mm	—
Height declared	86.6 in · 2,200 mm	89.8 in · 2,280 mm	—
Ground clearance declared	18.7 in · 475 mm	12.8 in · 325 mm	+46% H-345 (A)
Turning radius, braked declared	—	9.6 ft · 2.92 m	—
Fuel tank declared	57.1 qt · 54.0 L	66.0 qt · 62.5 L	+16% 930

Source

Source