Hürlimann DH-6 or Lamborghini R-1506 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the DH-6 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-1506 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Lamborghini R-1506 DT suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann DH-6 and Lamborghini R-1506 DT, with the call on each
QuestionDH-6R-1506 DTCall
Which puts more power through the PTO shaft?106.6 kW (143.0 hp)Traktorenlexikon, “Hürlimann DH 6”106.6 kW (143.0 hp)Traktorenlexikon, “Lamborghini 1506 DT”Not comparableNot comparable on power at the PTO shaft: the DH-6 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-1506 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the DH-6 and the R-1506 DT.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the DH-6 and the R-1506 DT.
Which pumps more oil for implements?—63.3 L/min (16.7 gpm)Traktorenlexikon, “Lamborghini 1506 DT”No figureNo call on hydraulic flow: no figure on record for the DH-6.
Which lifts more on the three-point hitch?2,900 kg (6,393 lb)Traktorenlexikon, “Hürlimann DH 6”—No figureNo call on three-point lift: no figure on record for the R-1506 DT.
Which is heavier, for traction?6,350 kg (13,999 lb)Traktorenlexikon, “Hürlimann DH 6”5,800 kg (12,787 lb)Traktorenlexikon, “Lamborghini 1506 DT”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the DH-6 and the R-1506 DT.
Which has the wider choice of gears?10Traktorenlexikon, “Hürlimann DH 6”16 to 24Traktorenlexikon, “Lamborghini 1506 DT”AheadThe Lamborghini R-1506 DT has 60% more forward gears (6 gears) than the Hürlimann DH-6 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the DH-6 and the R-1506 DT.
Which is faster on the road?20 km/h (12.4 mph) to 60 km/h (37.3 mph)Traktorenlexikon, “Hürlimann DH 6”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini 1506 DT”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann DH 6”540/1000 rpmTraktorenlexikon, “Lamborghini 1506 DT”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Lamborghini 1506 DT”No figureNo call on PTO independence: not stated for the DH-6.
Which drives on both axles?2WDTraktorenlexikon, “Hürlimann DH 6”4WDTraktorenlexikon, “Lamborghini 1506 DT”AheadThe Lamborghini R-1506 DT is available with four-wheel drive; the Hürlimann DH-6 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1969–19701984–1994Ahead (a fact, not an advantage)The Lamborghini R-1506 DT is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Lamborghini R-1506 DT has 60% more forward gears (6 gears) than the Hürlimann DH-6 (both forward gears, as stated by the source).
  • The Lamborghini R-1506 DT is available with four-wheel drive; the Hürlimann DH-6 is two-wheel drive (as stated by the sources).
  • The Lamborghini R-1506 DT is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Not comparable on power at the PTO shaft: the DH-6 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R-1506 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources