9 material differences · fewer than 12
Tractor oneHürlimann D-95 L/S1975–1977No measured PTO figureTractor twoIMT 545 De Luxe1986–1996No measured PTO figure
Which should you choose?
Read our verdict on the D-95 L/S and the 545 De Luxe → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D-95 L/S | 545 De Luxe | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 46.4 hp | — |
| Engine declared | Hürlimann DS-95 | IMT-PERKINS DM-33/T | differs |
| Displacement declared | 2.95 L | 2.50 L | +18% D-95 L/S |
| Maximum torque declared | — | 116 lb·ft · 157 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 16.2 mph · 26 km/h | — |
| Clutch declared | — | Pedal-operated dry two-stage Kron-Novi double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.2 gpm · 31.0 L/min | 4.2 gpm · 15.8 L/min | +96% D-95 L/S |
| Pressure declared | 2,702 psi · 186 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,475 lb · 2,030 kg | 4,905 lb · 2,225 kg | +10% 545 De Luxe |
| Wheelbase declared | 74.8 in · 1,900 mm | 76.8 in · 1,950 mm | — |
| Length declared | 129.9 in · 3,300 mm | 132.5 in · 3,365 mm | — |
| Width declared | 68.9 in · 1,750 mm | 69.3–88.4 in · 1,760–2,245 mm | differs |
| Ground clearance declared | 14.4 in · 365 mm | 13.5 in · 344 mm | +6% D-95 L/S |
| Turning radius, braked declared | 8.4 ft · 2.55 m | 11.0 ft · 3.34 m | +31% 545 De Luxe |
| Fuel tank declared | 42.3 qt · 40.0 L | 52.8 qt · 50.0 L | +25% 545 De Luxe |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D-95 L/S sources
- Source: Traktorenlexikon, “Hürlimann D 95 L/S”
- Source: Traktorenlexikon, “Hürlimann D 110”
IMT 545 De Luxe sources
- Source: Traktorenlexikon, “IMT 545”